With the latest firmware, DrayTek routers now support hardware redundancy by using VRRP, a powerful solution for network redundancy and reliability.
VRRP stands for Virtual Router Redundancy Protocol, and is a networking protocol that provides automatic backup for network devices, ensuring continuous network access, even if a router fails.
Note 1: VRRP requires that each router has its own WAN source which is similar to DrayTek HA active standby mode.
Note 2: Since both routers may not be of the same model, then there is no sync between them.
Note 3: The switch over to the secondary router occurs when the Primary goes down i.e. switches off but not when the WAN goes down.
The current Master router can also be determined by entering the virtual IP address into a web browser. The resulting web UI will be that of the current master router. Likewise, pinging or logging into each router’s actual IP address will reveal if either is down.
For more info see : https://www.youtube.com/watch?v=IUdWVBmYcDs
More info on VRRP in DrayTek routers – https://www.draytek.com/support/knowl…
See this short 5 mins video below: