Build a Mesh Network by using Wired connection #
https://www.draytek.com.tw/support/knowledge-base/7446
“Since Vigor 2862 firmware 3.9.2 (ac/Vac) and Vigor 2926 firmware 3.9.3 (ac/Vac), Vigor routers can support WiFi Mesh function. When using a Wi-Fi router as a mesh root, VigorAP mesh nodes can be connected to it via a LAN cable.
When to use Mesh Wired Uplink
Two examples of when to use Mesh Wired uplink are:
1. Creating a mesh network which includes both wired and wireless connections. This can be from outdoor wireless AP mesh nodes to an indoor VigorAP mesh root which is wired to the Internet gateway.
2.When the VigorAP is powered by PoE from a switch. The Switch will provide both power and data to the access point which will cause a loop between the wireless and wired connections. Enabling the Wired Uplink option will prevent this Loop.