How to set up Wi-Fi Mesh Networks using Preferred Uplinks and Auto Reselect #
https://www.draytek.com.tw/support/knowledge-base/7483
“Wireless Mesh nodes automatically select the next hop in the Mesh to connect to the Mesh root. However, the next hop may not always be the best node to connect to achieve stability which can occur when the next hop selected may have a weaker signal than an alternative node which is available.
A new feature has been added in the latest firmware for access points which allows you to manually select the best path for a Wi-Fi Mesh node to connect to the Wi-Fi Mesh root. This new feature known as Preferred Uplink and Auto reselect is available in AP903 (1.3.7) AP912 (1.3.5) AP918, AP920 AP1000 (1.3.4).
This article shows how we operate these features to create a stable mesh network.
Preferred Uplink
This feature will help the Wireless Mesh Node re-select another Mesh Node as the Preferred Uplink. This prevents the Mesh Node from setting up an uplink to a device having lower signal strength. The network administrator can also use this feature to deploy the mesh network topology according to their design.