Others
- How to send email Notifications Via Gmail server with OAuth2.0
- MyInk – Application notes
-
System Maintenance & Monitor
- Why is Memory Usage so high in DrayTek routers even before I configure anything?
- How to set up a WAN on DrayOS 5 – eg 2136
- How to set Date and Time for Vigor routers?
- How to add ACL (Access Control List)to limit the network access and add a layer of security to your network
- How do I upgrade the firmware on my Vigor router?
- The ‘traceroute’ output appears to getting blocked by the vigor router. What should I do?
- How can I get the Console Log from a Vigor3300/V?
- How to use the Dual/Multi-WAN (Vigor2910, Vigor2950, Vigor3300V)
- Security Tips for Vigor Routers
- Where can I find instructions on how to configure the printer with my Operating System?
- How do I upgrade the firmware on my Vigor3300/V?
- Abnormal Firmware Conditions
- Timeout Error Message when attempting to Upgrade Firmware on Vigor Router
- Do DrayTek Vigor Routers protect me from viruses and spyware?
- I cannot send or receive email through my ISP’s email account, but webmail and other email accounts work OK.
- How do I set a Hostname for the Draytek router?
- How do I enable remote management for Draytek Australia Support to analyse settings on my router?
- Restoring the Vigor3300 router to factory Default Settings When Unable to use WEB GUI
- Scheduling Automatic Reboot of Vigor3300
- Difference Between Vigor2830Vn/n+ and Vigor2830Vn/n
- How do I configure the Email Detection Function?
- How do I setup syslog over VPN?
- How do I setup Syslog to monitor my network?
- How to connect your PCs to your router
- I am now moving to Australia and want to know if my overseas sourced DrayTek router can be used in Australia
- What is UPNP in Vigor Routers?
- Can I get my router to deny internet access outside working hours?
- How do I change the MTU size of the router?
- Blocking Applications According to a Time Schedule in the Vigor2130
- How do I set the Domain Name Issued by the DHCP Server?
- How to configure Wake on LAN in Vigor Routers
- Do DrayTek Vigor Routers Provide Wake On LAN support?
- How to Re-enable Access to the Vigor3300 Management Interface if Accidently Disabled
- Using the Call Scheduling feature
- How do I add DNS SUFFIX on WAN interface?
- Getting Started
- How to make a Web / FTP Server Viewable from the Internet
- V2820 3.3.5.2 FTP RMD Fails
- Printer doesn’t work properly when I upgraded from WinXP to Windows 7.
- Router Function list – Feb 2012
- Uploading firmware using Mac OSX/UNIX via TFTP
- How to backup and restore Router configuration
- How to Reset the Router to Factory Default settings
- Where is the Manual for the QoS functions?
- How to Capture router LAN data packets for analysis using Wireshark
- How to capture Syslogs for USB Modems in Vigor Routers
- How To Command VigorLTE Router by SMS
- DrayTek Vigor 2862 Telnet Commands
- 6 Hidden Features in the DrayTek Vigor Router Dashboard
- Video – 6 Hidden Features in the DrayTek Vigor Router Dashboard
- Security Alert – CSRF Vulnerability and how to Prevent Attacks
- Central VPN Management (CVM) on Vigor3900
- Video – How to Log into your DrayTek Vigor Router
- Protecting your Vigor2960 and Vigor3900 from Malware Attacks
- How to Upgrade Router Firmware via TFTP using Mac OS Devices
- How to Change the Default SSL Port in Smart VPN Client
- How to Configure Internal RADIUS Server in DrayTek Routers
- What happens when Internet is working but many web sites cannot be accessed.
- Video – Upgrading Firmware in DrayTek DrayOS Routers
- Upgrading firmware in DrayTek DrayOS routers and backing up the configuration
- How to Reset/Clear Passwords for DrayTek Devices
- Video – How to Recover the Router if Firmware is Corrupted
- Video – Installing DrayTek Smart Monitor Software
- Typical Idle Power Consumption for Vigor2830
- Are there any Draytek broadband routers that support the use of hard drives formatted as NTFS?
- Enabling Samba on Vigor2130
- How many wireless devices can connect using the Access Control list?
- Firmware upgrade utility on linux
- Two Level Management Mechanism
- Sample config for Mail Alert
- Vigor2820 Web View File Names Truncated
- Smart Monitor SMTP settings
- Capturing Logs
- How to Check Firmware Version in Vigor Router
- How to Use Syslog in Vigor2960 and Vigor3900 to Monitor Visited Websites
- How do I create additional user accounts in Vigor Routers?
- What is the difference between Firmware files?
- How do I stop my router responding to PINGs from the internet?
- How can I configure my Vigor router from a remote location?
- What is the size limit of the USB drive on a Draytek Router ?
- Installing and Using DrayTek VigorConnect Management Software
- Remote Support
- How To use Gmail for Email Alerts on Vigor Routers
- Collecting Debug Logs from Vigor3910 using the Console Port
- Adjusting VPN MSS (MTU Settings)
- Tips to Improve Router Security
- Capturing and Viewing Syslogs in Vigor2960/3900 with an Attached USB Drive
- How to block the Login web page on a Draytek Router
- How do I Allow Remote Access to the Router?
- How to use telnet to collect console logs?
- How to check Smart VPN logs
- How to Reset the Admin Password on CPEs using Global Parameters in VigorACS 3
-
VOIP
- Upgrade the firmware of VigorIPPBX 3510 by Firmware Upgrade Program-TW
- Upgrade the firmware for VoIP module-TW
- Upgrade the System Prompt-TW
- Collecting VoIP logs from CLI-TW
- Designate a Outgoing WAN for SIP Traffic-TW
- Customize the Caller ID Type-TW
- Register the router to a SIP server-TW
- Use Phone Book to make VoIP calls over VPN-TW
- Make caller ID display or replace symbol ‘+’ -TW
- Prioritize VoIP Traffic by QoS
- Send the voice message by email-TW
- Dial VoIP call via IP address with Dial Plan-TW
- How to use Call Barring?-TW
- Control the Conversation Time for each Trunk by Time Budget-TW
- What do the SNR and Loop Att. values indicate?
- How can I disable the call waiting function for 2100V/2500V?
- Sometimes when I am on a call there is a beeping noise which is so loud that I cannot hear the other party.
- How can my VoIP router do Call Forwarding?
- My PC connects to the AP, however it doesn’t send or receive any packets once it has been authenticated
- Can I use a Fax machine on VoIP?
- What is meant by “Expiry Time”? I don’t want my VoIP calls to expire!
- VoIP – Digit Map
- VoIP – How do I connect FXS to PSTN-PBX?
- VoIP – How to enable Hotline function?
- How to forward incoming call to FXS port 2 while FXS port 1 is busy?
- How can I disable the G.729A/B codec (or any other specific codec)?
- Why is the CODEC used for a call not the one I select in Vigor VoIP configuration?
- Why is there an echo on my VoIP calls? How can I remove it?
- How to use the Digit Map
- How do I configure optimal DoS Defense settings to eliminate “skips” and “jitters” in VoIP conversations?
- How can I get the Console Log from a Vigor 3300?
- Can I use the Vigor3300V’s FXS and FXO ports as a PBX?
- How can I configure Vigor3300V’s FXO ports as Trunk lines for an Asterisk or Trixbox PBX?
- What are the differences in VoIP capabilities between Vigor models?
- Does Vigor V model support softphone and extension? How many extensions are supported?
- Can I attach my Cordless phone into the FXS port?
- How much bandwidth does VoIP actually require?
- What DTMF Mode should I use?
- Can I choose between SIP accounts for external calls by using a prefix? E.g. prefix of 9 to use SIP account 1; prefix of 8 to use SIP account 2; etc.
- How to configure a SIP Account
- Why am I experiencing very bad voice quality on VoIP?
- My VoIP calls cut off after a short time.
- Since I started using VoIP my Draytek router is logging multiple DoS attacks?
- Sometimes I can make VoIP calls, but sometimes I cannot.
- How to provide VoIP log to DrayTek engineers
- My company has VoIP for all staff, but at the moment only one PC can use the VoIP functionality.
- What are some common mistakes when setting up VoIP account(s) on Vigor routers?
- I can receive VoIP calls, but can’t call out
- The wireless connection between Intel Centrino laptop and Vigor2800G keeps dropping out when I use WPA-PSK/TKIP.
- Configuring QoS for VoIP device behind Vigor3300 Router
- How can I find my router’s uplink port?
- How to configure call forwarding
- Can I call between the two phone ports (intercom facility)?
- Configuring the Vigor2820 for FaktorTel VoIP Service
- How can I eliminate the pause before the Vigor places the VOIP Call?
- How to Transfer Calls or Make Internal Calls between Two FXS ports on Vigor Routers?
- Sample Configurations for VoIP
- How to Configure VoIP on Vigor3300V Router
- VoIP “dsp debounce” Command
- Does anyone know what causes the 2820vn to freeze when using a VoIP handset, NAS and Torrents at the same time?
- How does the PSTN Pass-Through Work on Vigor Routers Supporting PSTN connection?
- How to Configure VoIP on Vigor Router
- How to Hide Caller ID in Vigor Routers
- How to Install/Configure a Softphone
- STUN Server VOIP Configuration on Vigor Router
- I cannot get into my Vigor’s web configurator and the Dial-up Networking tries to dial continuously. What should I do?
- What does Call Scheduling do ?
- CLIR (hide caller ID) Not Working
- Ways to Debug VoIP Issues
- Answering machine not picking up VoIP calls
- Call Barring Function
- Changing Ring Pattern to Improve Caller ID Response Time
- Distorted Voice Quality when using VOIP
- DTMF Settings in Vigor Routers
- Custom Trunk How to Increase the Number of Trunk – Registering FXO/ISDN-TE port of 3300V+ to the Custom Trunk in VigorIPPBX
- An Introduction to SIP and debug logs
- What is SIP ALG?
- What is “T.38 Fax relay” service?
- Why can I not send more than one “#” key entry to VoIP phone on Vigor router?
- Can I call between the two phone ports on a 2830 router?
- How to Grab an unattended incoming Call
- Configuring Simtex VOIP SIP Trunk in VigorBX 2000
- Video – Vigor IPPBX 2820 User Prompts
- DrayTek IP PBX Configuration Tutorial
- Video – VigorIPPBX 3510 – VoIP over VPN in application
- Video – VigorIPPBX 2820 Auto Provisioning
- Video – VigorIPPBX 2820 configuration – Register extensions
- Setting up Voicemail in VigorBX 2000
- Maximum Number of IP Phones Connected to DrayTek Vigor2860 Router
- How to Disable SIP ALG on Draytek Routers
- How to Dial a Number That Includes “#” Character
- 2820IPPBX IVR Configuration Menu
- Configuration and Application for New Auto Attendant (AA)
- Problem Accessing iiNet Voicemail System
- How to enable and disable SIP ALG in linux based DrayTek Routers
- How to Disable VOIP Service in Vigor2820Vn Router
- How to Configure Vigor2830Vn so Incoming PSTN Calls Only Ring on Phone 1
- How to Switch Auto Attendant for Office and Non-Office Hours by using Extension
- VigorPhone 350 Speed Dial Setting
- How to Control the Conversation Time for each Trunk with Time Budget
- How to Configure and Use the Queuing Function in Hunt Group
- DIAL IN and OUT connection management screenshot
- Configuring VPN on iPhone (Whirlpool Post)
- Best VOIP settings for GOTALK
- How to configure the delay time before the VoIP number is dialled in Vigor Router
- Is there anyway I can configure my DrayTek to operate as a wireless ATA?
- Internal SIP device (ex. Linksys ATA, Elastix box) behind Draytek router won’t register.
- Engin VoIP call disconnects after 40mins
- An Introduction to VoIP “DialPlan” Configuration
- 2710 Caller ID not showing even after installing firmware 3.3.6.1
- What are the system and User prompts in the Vigor IPPBX
- Transferring a Call Using a Cordless Panasonic Analogue Phone
- How to configure and use the MWI on VigorIPPBX 2820
- VoIP Device Behind Vigor Router
- Why does PBX Auto answering machine fail to recognise my key presses?
- What is APSD?
- Transitioning Phone Services to the NBN
- VigorIPPBX Training Guide: Part 08
- VigorIPPBX Training Guide: Part 07
- VigorIPPBX Training Guide: Part 06
- VigorIPPBX Training Guide: Part 03
- VigorIPPBX Training Guide: Part 05
- VigorIPPBX Training Guide: Part 04
- VigorIPPBX Training Guide: Part 02
- VigorIPPBX Training Guide: Part 01
- How to Configure VoIP on Vigor Router (2765Vac/2865Vac/2866Vac)
-
Bandwidth Management (QoS)
- Optimising Router Throughput and Resolving Latency Issues
- How to set up QoS on DrayTek Routers (DrayOS 4 & 5)
- How to use Session Limit-TW
- How to use Bandwidth Limit-TW
- What to do if the NAT/ VPN Performance is lower than expected?-TW
- How to use QoS feature to set high priority for external VoIP service (e.g. an Engin Voicebox)?
- How do I configure QoS to give priority to my peer-2-peer software client?
- How can I test WAN speed connection with QoS On or Off?
- How do I setup QoS on an external VoIP device?
- QoS: If I allocate (say) 80% to VPN, does this leave only 20% of my bandwidth for other data types?
- Can I change the bandwidth at which QoS is applied on my Vigor2800?
- My Vigor router does not seem to be invoking QoS. I think the problem is that online status reports my connection downstream speed as 1.5Mbps – but my ISP plan has much less bandwidth.
- How Setup QoS for VoIP traffic on Vigor3300
- How to Use QoS Feature to set High Priority for Vigor Built-in VoIP Service
- How to use ATM QoS function
- Is QoS available on all Draytek Vigor Models?
- What Bandwidth should I set for my Vigor Broadband Router?
- What types of traffic can QoS be applied to?
- Webinar – Quality of Service (QoS) in DrayTek Routers ( 2019)
- Dual WAN and Bandwidth Management
- How QoS Setting affects Internet Network Speeds
- Using QoS Feature in Vigor2710 to set High Priority for External VoIP Service
- How to Configure WMM QoS In Vigor Routers
- What is QoS?
- DrayTek – DSCP Values QoS
- How to set up QoS in DrayTek Routers ( 2022)
- Enabling Ethernet WAN Traffic Shaping in DrayTek Routers using QoS or Bandwidth Limit
-
3rd Party Applications
- Protect the LAN clients by OpenDNS FamilyShield service (Vigor3900/2960)-TW
- Monitor your Vigor Router by a Webhook Server-TW
- Register a TelegramBot for Smart Action -TW
- Running Suricata on your Vigor3912S-TW
- Running VigorConnect Server on your Vigor3912S-TW
- Enhance the Internet browsing privacy by installing AdGuard Home on your Vigor3912S-TW
- How to send email Notifications Via Gmail server with OAuth2.0
- Podcast 3- Vigor3912s – Security & applications
- MyInk – Application notes
- Correcting MyInk Pen issues
- Using MyInk Handwriting Application
- How to check my actual internet speed?
- How to use QoS feature to set high priority for external VoIP service (e.g. an Engin Voicebox)?
- Help! I cannot seem to add file attachments to certain webpages, such as Hotmail Email or Draytek Australia Helpdesk system!
- How do I configure my Draytek Vigor router for use with Microsoft Xbox Live Service?
- Unable to Play Online Game – “Call of Duty/Modern Warfare”
- How to set up Vigor Router to use MSN Messenger or Windows Messenger
- How do I set up Vigor Router to use iChat?
- How to configure Fetch TV on a 2820
- I cannot play the game Half Life online. What can I do?
- 2920 supports Jumbo Frames
- Enabling Samba on Vigor2130
- How To use Gmail for Email Alerts on Vigor Routers
- Resolving Intermittent Connectivity Issues with Titan Software