Use High Availability in Hot-Standby Mode #
https://www.draytek.com.tw/support/knowledge-base/5404
“High Availability (HA) is a feature that allows the network administrator to use another router to the network for hardware redundancy. In Hot-Standby Mode, The primary and secondary router share the same WAN source; however, only the primary is usually online. When the primary router goes down, the secondary comes up, dial-up the same WAN line, and continues to provide Internet service to LAN clients.
DrayOS Linux
For DrayOS models, the two Vigor Router working in HA hot-standby mode can share the same WCF or DrayDDNS license key, and the configuration made on the primary will automatically sync to the secondary one. This article is going to demonstrate how to set up two routers in HA Hot-Standby Mode and create a group on MyVigor to share the WCF or DrayDDNS license key.
Note: HA works between the same series(i.e. 2927Lac+2927), and the firmware and country code of both routers must be the same.