How to configure the Vigor 2136 with New DrayOS 5 menu.
1: How to see a live demo of 2136: #
Click here to see live demo :
#
2: How to change admin password – add new user and allow remote access. #
Go to System Maintenance >> Accounts & Permission – see this 2 Mins video here
#
3 : How to setup the LAN interface and create VLANS. #
Go to Configuration>> LAN – see this short video
4: How to configure WAN settings #
Go to Configuration >> WAN – Check Horiz Tab : see Fig 6 -or see this short Video
4.1: How to configure WAN5 using USB Dongle on 2136 #
Go to Configuration >> WAN – Check USB port 1 is top most and click on edit to configure: see Fig 6b
5: How to set WIfi SSID – Radio settings – Roaming- AP discovery #
Go to Configuration >> Wireless LAN – Check Horiz Tab : seeFig 8 or see this short Video
5.1: How to set MESH Wifi on the 2136 using Virtual Controller on DrayOS5 #
see this url: https://www.draytek.com/support/knowledge-base/11896
6: How to configure firewall on the Vigor 2136 – see this short video #
6.5 Basic Firewall configuration guide for 2136 – see this Link #
#
7: How to configure Identity and Access Management ( IAM) in DrayOS 5 routers : Click Here #
and see additional notes below – para 44 – click here
#
8 :How to set Port forwarding – DMZ – Port Triggering – ALG #
Go to Configuration >>NAT Check Horiz Tab : see Fig 10 and application notes – FAQ here
8.1: How to Configure Wireless WAN in the Vigor2136ax Router #
see application notes – FAQ here
#
9: How to create an IPSEC LAN to LAN VPN tunnel between Vigor2136 and Vigor2927 #
see short Video here
9.1: How to set Device name #
Go to System Maintenance >> Device settings – check tab on the top horizontal line
See fig3
#
10: How to capture syslog #
Go to System Maintenance >> Device settings – check SYSLOG tab on the top horizontal line. You may need to type in the Syslog IP address. – See fig3 . For short term syslog capture – select override oldest log and export .
#
11: How to set SNMP #
Go to System Maintenance >> Device settings – check SNMP tab on the top horizontal line
See fig3
#
12: How to set Time and Date #
Go to System Maintenance >> Device settings – check TIME tab on the top horizontal line
See fig3
#
13: How to do Backup & restore #
Go to System Maintenance >> Backup & restore : See fig 3
#
14: How to create a Local Admin account #
Go to System Maintenance >> Account & permission : See FAQ Here. Note by default admin account does not have remote access from the WAN and the router also is not accessible from WAN . You will need to change this set up .
15: How to reboot the router #
Go to System Maintenance >> System reboot : See fig 2
You can choose to reset to factory default or only configurations excl registration and license keys
16: How to register the router. #
Go to System Maintenance >> Registration & Services : See fig 2
You may also check the service status on this page – see Horiz tab
17: How to do a Ping test or Traceroute #
Go to Utility >> Network Tools – check tab on the top horizontal line See fig 4”
You may also do an NSLookup .
18: How to access the WEB CLI: #
You may need to type the admin password and the CLI commands are limited and not same as DrayOS4 routers . See Fig 5
19: How to upgrade the firmware. #
Go to System Maintenance >> Firmware and upload firmware – see fig 1 below
20: How to set TR069 for ACS #
Go to System Maintenance >> Management – check tab on the top horizontal line
See fig 2
21: How to set route policy – IPV4 Static route #
Go to Configuration >> Routing – Check Horiz Tab : see Fig 8
22: How to set Bandwidth limit – QoS -Traffic shaping policy #
Go to Configuration >> Bandwidth Management – Check Horiz Tab : see Fig 9
23: How to create IP objects – Mac Objects – Schedule – Keyword Object #
Go to Configuration >>Objects Check Horiz Tab : see Fig 11
24: How to give remote access to the router from the internet: – #
Go to System maintenance >> Management and tick WAN Access with Https ports etc . see Fig 2 below
Also Auto logout and Ping enable can be activated on the same page. Note that user accounts may also be allowed / restricted to get access from the WAN. See System maintenance >> accounts & permission to change status. Note by default admin account does not have remote access from the WAN and the router also is not accessible from WAN . You will need to change this set up .
25: How to create a free DrayDDNS domain name on a Vigor 2136- DrayOS 5 Router #
see this short Video
26: How to create an IPSEC VPN with EAP encryption using a self signed certificate using SmartVPN #
see this application notes
Also see below for Comprehensive application Notes on 2136 and similar DrayOs5 Routers:
30: How to Track WAN Data Usage by WAN Budget : https://www.draytek.com/support/knowledge-base/4799
31: How to Activate DrayDDNS Service for a Free Hostname : https://www.draytek.com/support/knowledge-base/5168
32: How to Register a Vigor Router to VigorACS on DrayOS5 : https://www.draytek.com/support/knowledge-base/5210
33: How to Add IPv6 address on router’s WAN interface : https://www.draytek.com/support/knowledge-base/5784
34: How to Set Up Multi-PVC and Open a Virtual WAN Interface : https://www.draytek.com/support/knowledge-base/4908
35: How to Set Up Multi-PVC and Bridge to a LAN Port : https://www.draytek.com/support/knowledge-base/4907
36 : How to Set Specify the MAC Address of WAN Interface : https://www.draytek.com/support/knowledge-base/4906
37 : How to Activate DrayDDNS Service for a Free Hostname : https://www.draytek.com/support/knowledge-base/5168
38: How to Forward DNS Queries to a Private DNS Server : https://www.draytek.com/support/knowledge-base/5264
39: How to : Use Multiple LAN Subnets with Port-Based VLAN : https://www.draytek.com/support/knowledge-base/4911
40 : How to Use a Public IP on LAN using the ‘For Routing Usage’ option : https://www.draytek.com/support/knowledge-base/4797
41 : How to assign an IPv6 address to LAN clients : https://www.draytek.com/support/knowledge-base/5969
42: How to set DHCP Server Options on Vigor Router -DrayOS 5 : https://www.draytek.com/support/knowledge-base/5314
43: How to Set up OSPF Routing between Vigor Routers : https://www.draytek.com/support/knowledge-base/7662
44 : How to Set up BGP Routing between Vigor Routers : https://www.draytek.com/support/knowledge-base/5316
45: How to configure Address Mapping by Route Policy : https://www.draytek.com/support/knowledge-base/4914
46: How to set Inter-VLAN Routing : https://www.draytek.com/support/knowledge-base/5666
47: How to How to manage the router from the internet : https://www.draytek.com/support/knowledge-base/5352
48: How to Limit the IP which can access the management interfaces of the router : https://www.draytek.com/support/knowledge-base/5401
49: How to use mOTP for Remote access : https://www.draytek.com/support/knowledge-base/5173
50: How to use TOTP for remote access : https://www.draytek.com/support/knowledge-base/7580
51: How to set up OpenVPN to Vigor Router by using the self-generated certificate : How to configure an OpenVPN tunnel on a DrayTek Vigor2136 with SmartVPN client in Windows
52: How to setup IKEv2 PSK from MacOS to Vigor2136 : https://www.draytek.com/support/knowledge-base/5217
53: How to setup IPsec XAuth from macOS to Vigor Router : https://www.draytek.com/support/knowledge-base/5275
54: How to configure Identity and Access Management ( IAM) in DrayOS 5 routers : https://www.draytek.com/support/knowledge-base/11950
55: How to schedule firewall operation during working hours and block facebook. : https://www.draytek.com/support/knowledge-base/5987
55.b How to block Facebook using Keywords “facebook and DoH” :https://www.draytek.com/support/knowledge-base/5361#DrayOS5_section
56: Activate DrayDDNS Service for a Free Hostname with DrayOS 5 : https://www.draytek.com/support/knowledge-base/5168
57: How to setup a WireGuard VPN from Windows to Vigor Router : https://www.draytek.com/support/knowledge-base/7661
58: How to Wake up your PC by using WoL (Wake on LAN) for 2136 & DrayOS 5 : https://faq.draytek.com.au/docs/wake-up-your-pc-by-using-wol-wake-on-lan/
59: How to establish an IPSEC tunnel in main mode between 2 Vigor 2136 : : https://faq.draytek.com.au/docs/establishing-an-ipsec-tunnel-in-main-mode-between-two-vigor2136-routers-client-with-dynamic-ip/
or this one : https://www.draytek.com/support/knowledge-base/5154#DrayOS5_section
Fig 0.5 : How to change admin password , add users and allow remote access
Fig 1: Firmware upgrade

Figure 2: Remote access – TR069

Figure 3: Set Time – Device name – Syslog & SNMP – Backup & Restore.

Figure 4: Ping – Traceroute- Dns

Figure 5 : Web CLI

Fig 6 : WAN Settings – DDNS- DHCP options – Failover

Figure 6 b

Fig 6b – Type APN in USB/SIM1 PIN code ( see arrow below) eg connect for Optus sim and telstra.internet for Telstra Sim card.

Figure 7 : LAN settings – Bind IP to MAC- Inter LAN routing – VLAN

Figure 8 : WiFi SSID – Roaming – AP discovery

Figure 9 : Bandwidth limit- QoS – Traffic shaping

Figure 10 – Port Forwarding- DMZ- Port Triggering – ALG

Figure 11: IP objects – MAC objects- Schedule -Service Type object – Keyword Object

