On the Vigor2136, each WAN interface has a demilitarised zone, also called the DMZ, where you can add a LAN IP address and make it completely exposed to the Internet. This DMZ IP address will be accessible by the IP address of the WAN interface, and the router will map all the unsolicited traffic on the WAN interface to it. It is the solution when you need to forward traffic to a LAN server but cannot define the traffic by a UDP or TCP port.
See application note: https://www.draytek.com/support/knowledge-base/5213#DrayOS5_section
A special note on the priority order, which was Open Ports – Port Redirection – DMZ in DrayOS 4. Now it seems that it has been changed to Port Redirection – Open ports – Port Trigger, then DMZ but this is about to change with newer firmware versions. If you find that once DMZ is set and you lose remote management to your router, it could be that the priority has changed again and DMZ has taken priority, you may need to insert a port redirection first before the DMZ. We will keep you informed when its finalised.

Here is a short demo: