From firmware version 1.58.1 onwards, the Q1070x supports VLAN tagging.

In this example, we will use a Vigor2865 with a Q1070x.

-
Configure the trunk port on the Vigor2865 #
Go to LAN >> VLAN on the Vigor2865 and configure Port 5 (P5) as the trunk port.
Assign:
- LAN 2 → VID 2
- LAN 3 → VID 3

-
Configure the trunk port on the Q1070x #
On the Q1070x, go to Advanced >> VLAN and configure Port 5 (P5) as the trunk port, as shown below.

-
Configure P1 & P2 as an access port #
Configure Port 1 (P1) as an access port with PVID 3, allowing devices connected to this port to access LAN 3.
Configure Port 2 (P2) as an access port with PVID 2, allowing devices connected to this port to access LAN 2.

Devices connected to P1 will be on LAN 3 (192.168.3.x), while devices connected to P2 will be on LAN 2 (192.168.2.x).
