With Firmware 5.3.0.1 (27Nov 2024) the Vigor2136 is a single WAN router with multiple inputs, but only one WAN must be active at any time. In the future this situation may evolve to more than one WAN but nothing has been confirmed yet.
To configure the WAN interface see this short video here: 2.5 mins
You can also follow the few slides below:
1: How to set the WAN interface
Go to Configuration >> Physical interface and check the settings of the WAN port.

2: Go to Configuration >>WAN and modify the WAN settings accordingly:

3: Follow the arrows and type in the WAN settings – You may choose between PPPoE – DHCP and Static IP configuration

4: Set MTU size if necessary and click on Apply to save settings

Posted 28 Nov 2024- HL