For DrayOS 5 routers such as the Vigor2136, Vigor2767 and Vigor2928.
Normally, routers connected over a VPN need to use completely different LAN subnets. If both sides use the same subnet, such as the default 192.168.1.0 network, a routing conflict occurs.
Think of it like two different streets in different towns both named ‘Main Street’ with the exact same house numbers. If a computer on Router A tries to send data to a device on Router B, it checks the IP address and assumes that device is on the same local network. The traffic never enters the VPN tunnel because the router doesn’t recognise it needs to send it to the remote network.
To fix this, a feature called Bidirectional NAT (network address translation) is employed. This maps duplicate local IP addresses to unique ‘translated’ IP subnets specifically for travel across the VPN tunnel, allowing both networks to communicate seamlessly without changing their internal IP configurations.
Check out the following how-to video:
Published 19/66/2026-HL