DrayTek Vigor routers can use accounts configured in User Management for RADIUS and 802.1X authentication.
This can be useful in environments where a server is not available on site, and gives a central point to administer accounts both for User Management and for computer authentication over wired and wireless networks.
There are a few steps if no 802.1x authentication is required.
Step 1: Create a new user/password and set the landing page if necessary – arrow 4
Fig 1:

Fig 2: Set landing page

Fig 3: Enable Internal RADIUS and set subnet

Fig 4 : Exit and Login again – Note pop up window to indicate connection made

If 802.1x authentication is required then go to this url: https://www.draytek.com/support/knowledge-base/5146#drayos_section
Published 3/3/2025 – HL