The objective of this demo is to enable users in Australia to access the 2865 device through the primary router (2135) via port 443. The setup relies on the assumption that the country codes in the DrayTek router are current — typically updated during firmware upgrades — and that any newly issued WAN IP addresses are already mapped to a country. In practice, this is unlikely, as thousands of new IPs are allocated daily.
It’s also important to note that if the intention of this configuration were to prevent hacking, it would not be effective. Hackers can easily bypass such restrictions by using VPNs to mask their location. This demo is therefore provided solely to demonstrate how country codes can be applied within a firewall filter.
see a short 6 mins video here :