Backup and Restore the Configuration of Vigor Router
https://www.draytek.com.tw/support/knowledge-base/3789
“To prevent an incident crash like struck by lighting, or to perform clean firmware install on Vigor router, backup and restore the configuration can save lots of trouble and time from configuring the settings back. This note demonstrates how to backup and restore the configuration of Vigor Router
DrayOS Linux
Configuration Backup
Go to System Maintenance >> Configuration Backup and click “”Backup”” button.
A CFG file will be downloaded to the computer’s downloads folder, and the file name will be the model name with today’s date.
Restore Configuration
Go to System Maintenance >> Configuration Backup and click “”Choose File”” to choose the CFG file from your computer. Then click “”Restore”” to upload the configuration.
After the file uploaded successfully, it will pop up a message. Click “”Restart”” to restart the router and apply the settings.
How to encrypt the configuration file?
The configuration file can also be protected with a password. To encrypt the CFG file, while you back up the configuration file, enable “”Protect with password”” and enter a password. Please keep the password in a safe place, there’s no way to recover the CFG if missing the password.
And while restoring a CFG file which is protected by a password, you will be prompted to enter the password.
Can I upload a CFG file from an older firmware version?
Yes, the CFG file works between different firmware versions, but please note that features may vary from firmware version. Therefore, if you have done a major firmware upgrade, we would recommend to reset the router’s settings to factory default and configure the router again.
Can I upload a CFG file from different model?
Newer Vigor Routers supports using a CFG from a different model. For example, Vigor2925 series supports using a CFG file from Vigor2920 series; and Vigor2860 series supports using CFG files from Vigor2820, Vigor2830, and Vigor2850 series. But there are some restrictions.
Check the compatibility before taking the configuration from old model to a new one. The supported model list is shown at the bottom of System Maintenance >> Configuration Backup page. Make sure the backup CFG file was made from the supported firmware version or better. If not, please upgrade to the listed version or better before saving the CFG file.
If the supported model list is not shown, it means this model or this firmware version does not support using the CFG from other models yet.
Auto Backup to USB storage
Vigor routers also support auto backup configuration to USB storage by period or any configuration changes.
Partial Backup in certain features
Vigor Routers also support partial backup configuration in certain features:
Bind IP to MAC
Hotspot Web Portal Profile
Static Route
Port Redirection
Open Ports
Firewall Rule
Objects Setting
Remote Dial-in User Profile
Lan to Lan Profile
Certificate Backup
Wireless LAN Access Control
Go to Objects Setting >> Objects Backup/Restore and you are able to select categories you want to backup.”