Step 1:
- Enable Wireless
- Enter a name for your wireless network
- Select a channel to use from the pull down menu
Step 2: Set up Wireless Security
- Select a security mode – We have used WPA/PSK
Step 3:
- Enter a password for the wireless security (Pre-Shared Key)
The pre-Shared key must be at least 8 characters and you will need to enter this on your computer when prompted to connect to the wireless network
Security Settings | << Back |
Mode : | [Disable \/] | ||
Set up RADIUS Server if 802.1x is enabled. | |||
WPA: | |||
Encryption Mode: | TKIP | ||
Pre-Shared Key(PSK) | [ Enter a password here – at least 8 characters ] | ||
Type 8~63 ASCII character or 64 Hexadecimal digits leading by “0x”, for example “cfgs01a2…” or “0x655abcd….”. | |||
WEP: | |||
Encryption Mode: | [64-Bit \/] | ||
Use | WEP Key | ||
( )Key 1 : | [ ] | ||
( )Key 2 : | [ ] | ||
( )Key 3 : | [ ] | ||
( )Key 4 : | [ ] | ||
For 64 bit WEP key Type 5 ASCII character or 10 Hexadecimal digits leading by “0x”, for example “AB312” or “0x4142333132”.For 128 bit WEP key Type 13 ASCII character or 26 Hexadecimal digits leading by “0x”, for example “0123456789abc” or “0x30313233343536373839414243”. |