Set up the main router


Search for the AP800 on the Wireless LAN>> Access Point Discovery. Select repeater then click add.

You can see now that the AP800 is added to the WDS setting of the 2710.

On the AP800 select AP Bridge-WDS

Change the IP of the AP800 to match with the IP subnet of the main router so you can easily access it if you want to change anything.

Go to Wireless LAN Access Point Discovery and select the main router’s SSID then click add.

You will see on Wireless LAN >> General settings that the main router is now added on the Phy Mode.


To see if there is a successful connection on the main router, go to Wireless LAN>> WDS setting then Click Link Status.

The link is now active.