- Download and install the latest firmware from:
http://www.draytek.com.au/support/downloads/vigor2760-delight-series/
Firmware file: Vigor2760_v3.8.2-02v_en.zip
Configuration:
Select Modem Code
- Go to “WAN >> General Setup”
- Select “WAN1”
- “DSL Modem Code:” select “AnnexA_574307_571801”
You can also select VDSL2 for Physical Mode settings, although “Auto” should be OK.
Configure Access Mode
There is no specific configuration needed for “WAN >> Internet Access”, following the PPPoE username and password from ISP should be enough.
Click to save the settings.
Now go to Dashboard page and verify that you are now connected.