Draytek Router :
Go to VPN and Remote Access >> LAN to LAN to Create profile
1. Common Settings :
– Enter profile name
– Select Dial-out
– Enable Always on
2. Dial-Out Settings :
– Select IPsec Tunnel IKEv1
– Enter the public IP of sonicWALL as Server IP
– Enter a Preshared Key
– Select IPsec Security Method to AES with Authentication
3. Click Advanced
– Select Aggressive mode
– Check Phase 1 & 2 proposal
– Set local ID as that of local IP address of Draytek router
4. Setup the TCP/IP Network as per network Diagram
SonicWALL:
5. Add an Address Objects for remote subnet (Draytek Router local network)
– Go to Network >> Address Objects
– Add Address Object
6. Goto VPN >> Settings
– Add a VPN profile
7. General >> Security Policy
– Set the setting as shown in picture
8. General >> IKE Authentication
– Enter the Shared Secret as we set at step 2
– Enter the ID as we set at step 3
9. Network
– Local Networks : Select LAN Primary Subnet
(the local subnet of sonicWALL)
– Remote Networks : Select the IP object we set at step 5
10. Proposals
– Set the Phase 1 proposal and Phase 2 proposal the same as in step 3
11. Go to VPN and Remote Access >> Connection Management
– Check the VPN Connection Status