This document describes the configuration of DrayTek Vigor broadband routers when used with TPG HFC NBN connection.

TPG will have provided you with some details such as username and password to use when connecting to their network.  You will also need to enable VLAN tagging for the WAN connection.


                                                                                                                 TPG NBN HFC Settings

NBN Username                    

NBN Password                               Your TPG password

Encapsulation                                PPPoE

Authentication                               PAP

VLAN ID                                        2


Step 1

  • Go to “WAN>>General Setup menu in the Vigor router.
  • Select Enable for VLAN Tag Insertion.
  • Enter VLAN Tag value of 2.
  • Click OK to save.


Step 2


  • Go to “WAN>>Internet Access” menu in the Vigor router.
  • Select PPoE
  • Select Enable
  • Select Enable
  • Enter the username and password
  • Select PAP or CHAP for PPP Authentication
  • Click OK to save