Vigor3300 running firmware version 2.6.3 (EN) supports scheduled rebooting of the router. Telnet system command to use is “autoreboot”
Command syntax is:
DrayTek/system> autoreboot ?
Full Name:
auto reboot function
Description:
Syntax:
autoreboot -s (Show status)
autoreboot -e <Enable>
autoreboot -t <Hours>
Parameters:
<Enable> (0: Disable, 1: Enable)
<Hours> (Number of hours)
DrayTek/system>
For example to reboot router every 24 hours use the following telnet commands:
System
autoreboot –e 1
Do not reboot router when prompted
autoreboot –t 24
Now reboot router to enable changes.
After router rebooted you can log into the router to check the settings using the command:
autoreboot –s