STEP 1:
Insert the 3G modem on your PC and disable the SIM PIN code. This is usually found under Tools>>Options.
STEP 2:
Insert the 3G modem on your router.
STEP 3:
In web browser (IE or Firefox) access the menu page of the router (default IP address is http://192.168.1.1)
Username: admin Password: admin
STEP 4:
Go to WAN Setup page
STEP 5:
Go to Wan>>Internet Access then select Connection Type 3G USB Modem
STEP 6:
Enter the following details
- Tick Enable 3G always On
- APN Name: telstra.bigpond for Bigpond connections.
APN Name: telstra.internet for Telstra connection. - Enter your PPP username and password for Bigpond. Leave blank for Telstra.
- Then click OK
STEP 7:
Connect the 3G USB modem to the USB port and wait for the 3G modem to connect.
You can also check your online status in VigorFly200 for the 3G connection status
If all text is in green (except the signal), It means that the 3g connection is working.