Most ISPs in Australia offer PPPoE authentication.
Step 1: Login to your DrayTek router. [See the Quick Start Guide included in the box for instructions or download it from our downloads page]
Step 2: Go to Internet Access
Step 3: Select PPPoE/PPPoA and “Enable” this profile
Step 4: Please make sure your “DSL Modem Settings” are:
VPI: 8
VCI: 35
Encapsulating Type: LLC/SNAP
Protocol: PPPoE
Modulation: Multimode
VCI: 35
Encapsulating Type: LLC/SNAP
Protocol: PPPoE
Modulation: Multimode
Step 5: Setup your username and password, as supplied by your ISP. Note that many ISPs issue broadband usernames which look similar to email addresses.
Step 6: Click the [OK] button.
After 3 secs to 5 mins you sure have access to Internet. You can also go to Online Status to check your WAN status.