TW – DrayTek FAQ

Skip to content

Knowledge Docs
Videos
Support
- Submit a ticket
  - Remote Support
<< back to DrayTek ANZ
Search for:

Search for:

High Availability

11

Import Certificate for Vigor3900’s HTTPS Access-TW
Use High Availability in Hot-Standby Mode-TW
VRRP with DrayTek Routers
High Availability Mode in Vigor3300 Routers
High Availability “Active Standby Configuration”
Webinar – High Availability in DrayTek Routers
Video – High Availability in DrayTek Routers-3900
Configuring High Availability Mode in Vigor3900 Router
How to setup WAN2 primary and LTE failover (VigorLTE 200)
High Availability in DrayTek Routers – Hot standby- Vigor 2926
High Availability in DrayTek Routers – Hot standby- Vigor 2926

Firewall & Content Filtering

126

Can IPV4 and IPV6 objects coexist in the same firewall rule on a Draytek router ?
How to use QQ Filter of Vigor3900-TW
Find out which websites are visited by the LAN clients-TW
Difference between DNS Filter Profile and DNS Filter Local Setting-TW
How to prevent smart phones from surfing the Internet from Vigor3900/2960-TW
Use Vigor3900/2960 to block Youtube for some of LAN clients only-TW
How to block or pass traffic between Vigor3900/2960’s different LAN networks-TW
Blocking a Website by URL Content Filter and DNS Filter-TW
Block YouTube Service for All the LAN Clients-TW
How to have more subnets in one LAN profile (for Vigor3900/2960)-TW
How Firewall Filter Rules Work-TW
Restrict Internet access for time intervals (For Vigor3900/2960)-TW
Syslog about Firewall and Content Security Management-TW
Prevent Potential Punycode Phishing Attack-TW
Changing the WCF Service Provider-TW
Block FTP Service by Firewall-TW
Introduction to Firewall Content Security Management-TW
Use DNS Filter and local DNS server at the same time-TW
Authenticate users with an AD/LDAP server-TW
Force LAN Clients to use YouTube in Restricted Mode-TW
Create Firewall rules to restrict LAN to WAN access to specific countries by using country codes-TW
Block Facebook by APP Enforcement-TW
Use Firewall in User-Based mode with a RADIUS server-TW
Introduction to Denial of Service (DoS) Defense-TW
How to enable firewall during working hours-TW
How to use Country Code to block WAN clients from a DrayTek 2135
Can I activate more than one WCF License at a time ?
How to Configure Firewall Rules on the Vigor2136 to Block YouTube & Facebook
Which DrayTek router can offer Intrusion detection / deep packet inspection?
How do I configure optimal DoS Defense settings to eliminate “skips” and “jitters” in VoIP conversations?
Using Firewall IP Filter and NAT
How to configure Vigor2910 Object Oriented Firewall?
How do I select multiple sites for blocking in URL content filtering?
How to implement Web, URL and APP Filter on a 2950 (globally)?
Do DrayTek Vigor Routers protect me from viruses and spyware?
How to Block “Facebook” using the Vigor2820 Router (Global Settings)
How to Block MSN Messenger Webcam Video
Cannot attach or send attachments through my Gmail account when using Vigor2700 router
Blocking incoming SMTP traffic from all except one server
Advanced CSM Functions in Vigor Routers
How to Configure Vigor Router to only allow RDP access from one Source IP
How can I block IM/P2P for specified people?
How to Block “Facebook” for Some Users with the Vigor2820 Router
How to Schedule IP filter to Block all services on certain IPs
Block all and allow certain IPs to access RDP from the internet. Connect remote VPN Client via IPSEC and access RDP using private IP.
Block Facebook with Schedule
Blocking Port 5060 from Internet Except for One Incoming IP Address
Configuring Vigor Router Firewall to Block Internet Access for one PC but Allow Access to the VPN Connection on the LAN network
How to Block outgoing SMTP Mail from all but one Computer
How to set up Web Content Filter for Some IP Addresses
What is the Difference between Call Filter and Data Filter?
The difference between IP and Object based firewall
Vigor 3300 VPN Issue
How to Block all ports for 192.168.1.0 subnet 255.255.255.0 and allow single IP to access telnet for 3300/v
How to set up IP filter rules for the remote dial-in user
Why Does Enabling Stateful Packet Inspection on the 2700 Router Causes Performance to Drop?
How to Block Facebook (https and http) using Filter Setup
Vigor2820n P2P Blocking
How to block all ports and open just certain ports direction is WAN to LAN
How to block all ports and open just RDP port on a VPN tunnel
How to use Blacklist and Whitelist Websites using Firewall Keyword Objects
Filter rule doesn’t work
How to block youtube using URL content filter
How to Configure Vigor2700 Router to Only Restrict Internet Access for One PC
Priority for Router Firewall Rules
Content Security Management for Productivity Enhancement demo by Vigor2920 series
Creating a White List URL Filter to Block all URLs Except for Required Sites on Vigor3200
Creating a White List URL Filter to Block all URLs Except for Required Sites
How to Schedule Content Filtering
How to Block Reddit.com on DrayTek Devices using Firewall filters
How to Block Reddit.com or any https website on DrayTek Devices using Firewall filters
How to set up Web Content Filtering on Vigor DV3900
How to configure firewall filter rules to allow VPN if default rule is set to block all traffic.
Video – How to Configure DrayTek Firewall to Restrict Incoming Connections from the Internet
Configuring Vigor Router Firewall using Objects to allow RDP Access from one Source IP Address
Configuring Firewall to allow a single PC to access to SMTP mail Server on Internet
How to Restrict Incoming Connections from the Internet using Vigor2960 Router
Video – How to Restrict RDP Incoming Connections from the Internet using Vigor2960 Router
How to Configure Vigor 2960 Router to only allow RDP access from one Source IP
Block Incoming SMTP Traffic from Internet except Specific IP Addresses
How to Restrict some HTTP and HTTPS Web Sites for Wi-Fi Guest Users
Configuring Vigor2830 to block YouTube without using DNS Filter
How to Block Bit Torrents or P2P Apps on Vigor 2830/2860/2925/2760 Series Routers
Webinar – Latest Cost Effective NBN Ready Broadband VPN Firewall Router Solution
Webinar – DrayTek Content Security Management (CSM) Features and Configuration Options.
Video – How to use URL Filter with DNS Filter to Block a HTTPS Website
How to setup Web Content Filter with time range on Vigor2130
How to setup Web Content Filter with IP range on Vigor2130
How to setup Web Content Filter on Vigor2130
Unable to access HTTPS server after upgrading firmware in Vigor2830 to version 3.6.4
Blocking the new version of Facebook using WCF won’t work.
Not able to access internet when Bit torrent download is initiated
How to activate the Web content filter license on DrayTek MyVigor website
Geo-Blocking incoming traffic LAN to WAN
How to enable the URL Content Filter & DNS Filter to Block Social Networking
How to activate the New DrayTek Web Content Filter – DrayTek URL reputation
How to filter out Punycodes in DrayTek Routers
How to solve issue with WCF working but administration page not displayed
How to Configure a DrayTek Firewall to allow only VPN Traffic
URL Filter
Web Content Filter

Videos

228

How to use basic CLI commands on DrayOS 5 routers
How to use iPerf to measure the WAN speed of a DrayTek router.
How to create an IPsec VPN tunnel using the same IP subnet between two DrayTek routers-DrayOS 4- Routers
DrayTek Vigor2928be Series Router Overview
DrayTek Vigor2767 Series Router Overview
How to add an eSIM to a Vigor2767ax-4G
How to set up a LAN to LAN IPsec VPN tunnel between DrayOS 4 and DrayOS 5- between 2136 and 2962
VRRP with DrayTek Routers
How to set up a LAN to LAN IPsec VPN between Vigor 2136 and Vigor 2962
How to upgrade firmware on a AP805 using TFTP method
How to send email Notifications Via Gmail server with OAuth2.0
How to configure DMZ on a Vigor2136 with a firewall filter – DrayOS 5
How to configure an OpenVPN tunnel on a DrayTek Vigor2136 with SmartVPN client in Windows
How to create an IPsec Tunnel using Pre-shared key on a Vigor2136 and SmartVPN client
How to set up a WAN on DrayOS 5 – eg 2136
How to Configure Firewall Rules on the Vigor2136 to Block YouTube & Facebook
How to change admin password on Vigor 2136 and DrayOS 5 routers
Introducing DrayOS 5
Configuring the Vigor2865L-5G and Vigor2927L-5G for 5G Internet access
Overview – VigorSwitch P1282 & G1282
VigorSwitch P2100 & G 2100- Overview
Which DrayTek router can offer Intrusion detection / deep packet inspection?
Abnormal Firmware Conditions
How to Configure 3G 4G WAN using a USB dongle with a Sim card ?
How to install VigorACS 2 in Google Cloud
How to install Vigor ACS 2/ ACS 3 in Azure Cloud
Video – How to Configure the Vigor130 Router for VDSL2 NBN Network
Video – How to Configure the Vigor130 Router for VDSL2 Bridge Mode
Webinar – VLAN and its Applications
Video – How to change the default LAN IP Address in DrayTek Vigor2925 and Vigor2860 routers
Video – 6 Hidden Features in the DrayTek Vigor Router Dashboard
Video – Load Balance/Route Policy
Webinar – DrayTek and NBN in Australia
Video – How to Log into your DrayTek Vigor Router
Video – How to Configure the Vigor2860 Router for VDSL2 Connection on NBN Network
Webinar – DrayTek VigorACS SI – Features and Benefits – January 2017 Recording
Webinar – High Availability in DrayTek Routers
Video – How to Configure DrayTek Firewall to Restrict Incoming Connections from the Internet
Video – How to Configure the Vigor 2760 Router for NBN VDSL Network
Video – How to Enable WAN Aggregation in DrayTek Routers
Video – High Availability in DrayTek Routers-3900
Video – How to Restrict RDP Incoming Connections from the Internet using Vigor2960 Router
Video – How to set up a wireless WAN
Video – DrayTek Central Switch Management
Video – Configuring the Vigor2860L and Vigor2925L for LTE Internet Access
Video – Configuring the DrayTek Vigor2860 router for TPG NBN
How to install VigorACS 2 in AWS Cloud
How to filter out Punycodes in DrayTek Routers
Webinar – Quality of Service (QoS) in DrayTek Routers ( 2019)
Video – Upgrading Firmware in DrayTek DrayOS Routers
Video – Configuring and using Access Point Management in Vigor2860 & Vigor2925 Routers
Video – How to Set Up IPsec LAN To LAN VPN Tunnel Main Mode between Two Vigor Routers
Video – Setting up Port redirection on Vigor Router
Video – How to set up LAN to LAN PPTP VPN connection Vigor Router to Vigor Router
Webinar – Load Balance / Route Policy in DrayTek Routers
Webinar – Central VPN Management
Webinar – Latest Cost Effective NBN Ready Broadband VPN Firewall Router Solution
Webinar – WAN Connectivity Options
Webinar – DrayTek Smart Monitor Advanced Network Traffic Analyzer
Webinar – DrayTek Content Security Management (CSM) Features and Configuration Options.
Webinar – DrayTek’s Latest Solution for Multiple Wi-Fi AP Deployment
i-LAN DrayTek Webinars
Video – How to Use Central VPN Management (CVM)
Video – How to Configure the DrayTek Vigor2860 and Vigor2925 Routers for 4G USB WAN Connections
Video – How to Setup IPsec VPN Tunnel (Aggressive Mode) Between Two DrayTek Vigor Routers-2925 & 2860
How to Configure Point to Point Bridging Between Two Wireless Access Points AP900
Video – Connecting a DrayTek Vigor Router to the Internet via ADSL
Video – How to Register a CPE device into DrayTek VigorACS3
Video – How to Configure the DrayTek Vigor2760 Delight Router for Ethernet WAN
Video – How to Recover the Router if Firmware is Corrupted
Vigor2960 / 3900 / 300B 4G Configuration
Video – How to use URL Filter with DNS Filter to Block a HTTPS Website
Video – Creating VPN tunnels using DrayTek VigorACS SI
Video – Configuring ADSL connection in DrayTek Routers
Configuring the Vigor120 Router for Bridge Mode
Installing and Using DrayTek VigorConnect Management Software
How to Configure the DrayTek Vigor167 for PPPoE
How to create an OpenVPN Dial-in Connection
How to use AutoVPN and VPN Monitoring using SDWAN in Draytek VigorACS3
How to change all the system settings in VigorACS 3
How to add the Google API or leaflet API in VigorACS3
How to set up QoS in DrayTek Routers ( 2022)
How Hardware Acceleration Works in DrayTek Routers
How to use provisioning in Draytek VigorACS 3 to replicate configuration of similar routers in the network
How to Use NAT in Draytek Routers
How to prepare scheduled tasks on Draytek routers using VigorACS 3
How to create reports in Draytek VigorACS3
How to Monitor devices using Draytek Vigor ACS3
How to add a New User in Draytek Vigor ACS3
Video-How to add a new CPE to Vigor ACS 3
How to add a network in ACS 3
How to use Smart VPN using 4 Types of Encryption
How to create VPN load balancing on Draytek routers
Vigor ACS3- All features explained
DrayTek Vigor ACS 3 Webinar Series
How to Configure the DrayTek Vigor167 for Bridge Mode-short Video
How to install a DrayTek VigorACS 3 under Linux O/S
How to Set up a DrayTek Vigor2620Ln in VDSL Bridge Mode
How to Configure a DrayTek Firewall to allow only VPN Traffic
Video - Firewall
Video - Wireless LAN
Video - Connectivity
Video - VigorACS
Video - Management
Video - VPN
Video - Webinars
- Which DrayTek router can offer Intrusion detection / deep packet inspection?
- Webinar – VLAN and its Applications
Video - Routing & NAT
Video - Firmware
- Introducing DrayOS 5
- Which DrayTek router can offer Intrusion detection / deep packet inspection?
Video - Switches
4G & 5G LTE
- How to add an eSIM to a Vigor2767ax-4G
- Configuring the Vigor2865L-5G and Vigor2927L-5G for 5G Internet access
Video- DrayOS 5

Latest FAQ releases

16

Optimizing Router Throughput and Resolving Latency Issues
How to set up API access for the DrayTek ACS 3 platform.
SOAP Web Service API
RESTful web service API for DrayTek ACS 3
Some additional info on the ACS 3 cloud accounts.
Can IPV4 and IPV6 objects coexist in the same firewall rule on a Draytek router ?
What is DraySOAR from DrayTek ?
What is the difference between a config backup and a config export ?
How to create an IPsec VPN tunnel between two DrayTek Vigor2136 having the same LAN subnets-DrayOS 5 routers
How to use basic CLI commands on DrayOS 5 routers
How to create an IPsec VPN tunnel using the same IP subnet between two DrayTek routers-DrayOS 4- Routers
List of the Knowledge base of DrayTek-Australia -25 Sept 2025
List of the Knowledge base of DrayTek Corp- May 2026
Additional Notes on USB dongles tested on DrayTek Routers
New Firmware releases for DrayTek
Calendar Events from DrayTek – AU incl Webinars

Internet Connections

334

Troubleshoot for no Internet connection or website not loading completely-TW
Access a Vigor130 in Bridge Mode-TW
How to add an eSIM to a Vigor2767ax-4G
The Reliable Ways to Identify the SIM’s ISP (Router‑Only)
How to load the nano SIM card in the DrayTek 2865Lax-5G
How to add an eSIM to Vigor C510ax – Lte – 5G
How to insert Nano Sim in DrayTek routers
Additional Notes on USB dongles tested on DrayTek Routers
Podcast 7- Multi-WAN Load Balancing & Fail over
What are the Chipsets used by DrayTek routers
How to connect ADSL ISPs via PPPoA
What do the SNR and Loop Att. values indicate?
When I first was connected up to ADSL2+ I was able to sync at speeds around 17Mbit. Over time this has consistently dropped and I have now reached an all time low of about 10 Mbit.
How far is my house from my exchange? What ADSL2/2+ speed am I likely to get?
ADSL2/2+ Tips and hints
How to test my ADSL2/2+ connection? How can I know if I have a good connection?
How to do an Isolation test
How to setup Telstra Turbo 3G Modem™ with DrayTek Router
What is the call bumping issue?
I have a Vigor 2700 or 2800 … which firmware should I be using, there are several available that I see
My ISP says they don’t support DrayTek modem/routers, and won’t help.
How is my internet being used when I’m not there?
How to connect BigPond ADSL?
How to connect Optus ADSL?
How to connect ADSL ISPs via PPPoE
I can’t connect to ADSL
My modem/router doesn’t see the internet connection. ADSL Status is red. What can i do?
Can I use my DrayTek modem/router on an ADSL2/2+ connection?
Will my ADSL1 modem work on my ADSL2/2+ line?
I just bought a Vigor Router and I can’t connect to the Internet. What should I do?
How can I use a DrayTek Broadband Router with an Optus-supplied DSL-302G modem?
BigPond Cable Migration
Once my BigPond Cable connection is down, it can take from minutes to hours to re-establish.
Are DrayTek ISDN units available in Australia?
What is Call Bumping, and how do I use it?
Internet connection using PPPoA (in New Zealand) with Vigor3300/V
Troubleshooting 3G Network Connections
I am experiencing line sync issues. What information do I need to send to Draytek Support?
Why 3G connection status does not show signal strength?
Where can I find information on how to configure WAN settings on my Vigor3300/V?
How to setup Three/Hutchison 3G USB Modem with DrayTek Router?
How to Setup BigPond or Telstra 3G with VigorFly200
Vigor2110/2710 Series Bigpond/Telstra 3G setup
How to setup BigPond 3G USB Modem with DrayTek Router
Vigor2130 Series Bigpond 3G setup
Vigor2130 Series Optus 3G setup
How to setup Vodafone/Optus 3G USB Modem with DrayTek Router
Vigor2820 Series Bigpond 3G setup
How to determine the Signal Strength of the NextG Modem Connected to Vigor Router
How to setup TPG IPTV on Vigor27xx series routers
How to setup TPG IPTV on Vigor2820
Configuring the Vigor2800 Router for MPoA Pass-through
MINSNRM on Vigor2820 Router
I have leased a block of public IP Addresses from my ISP. How do I configure my router to use them?
ADSL Speed Versus Distance
What are the ADSL Settings?
My 2800 series Router will not connect to ISP. I Have ADSL1
ADSL2/2+ Features
3G Wireless Failover Time Delay
Are Older DrayTek Routers Upgradable to ADSL2/2+?
I do not know what VPI/VCI, Encapsulation Type, protocol is. How can I configure DrayTek Vigor?
How can I Configure my Vigor Router in “Bridged Mode”?
What is the Difference between the 3300V and the 3300V+
Can I get ADSL?
Does the 2800 Support Annex-M and How do I Enable it?
How can I limit my ADSL line sync speed in my Vigor2800 router to a fixed value?
Configuring Vigor2820 for ADSL connection
How to Capture Windows PPP Logs
How to Setup TPG IPTV on Vigor2860
How to Connect a DrayTek Vigor300B router to TPG NBN
How to Connect a DrayTek Vigor2925 router to TPG NBN
How to Connect a DrayTek Vigor2860 Router to TPG NBN
How to connect a DrayTek Vigor2830 for Telstra NBN
Configuring Vigor130 for TPG VDSL NBN Connection
What can I do If my 3G/4G/LTE modem is not working?
Which 3G 4G modems are compatible with Vigor Routers?
How to set up the built-in 3G/4G/LTE WAN in the Vigor LTE Series
How To Send an SMS from the VigorLTE routers
How to Configure 3G 4G WAN using a USB dongle with a Sim card ?
What is Wake on LAN (WOL)?
Connecting DrayTek Broadband Routers to Optus Cable Service
Pairing the Vigor120 with a Time Capsule
Configuring the Vigor120 Router for PPPoA/PPPoE Pass-through
How to connect to Telstra NBN using Draytek 2860n series router
How to Connect a DrayTek Vigor2120 router to TPG NBN
Connecting Vigor2120 to 4G USB modems
How to Connect a DrayTek Vigor2120 router to DODO NBN
Video – How to Configure the Vigor130 Router for VDSL2 NBN Network
Video – How to Configure the Vigor130 Router for VDSL2 Bridge Mode
Configuring Vigor130 for VDSL Bridge mode
Configuring Vigor130 for NBN VDSL2 Connection-Telstra
How to Connect DrayTek Vigor130 to VDSL2 connection on Optus NBN network
How to Connect DrayTek Vigor130 to VDSL2 connection on NBN network
Video – How to Configure the Vigor2760 for a 4G Modem
How to Connect DrayTek Vigor2860 / Vigor2862 / 2865 to VDSL2 connection on NBN network
TPG NBN HFC settings in Draytek Routers
How to check if the DrayTek Vigor2860/2925 LTE Router Frequency Bands are supported on your Area
Video – How to Configure the Vigor2860 Router for VDSL2 Connection on NBN Network
How to Pass Second WAN IP address to another Router connected to Vigor2952 LAN
Video – How to Configure the Vigor 2760 Router for NBN VDSL Network
New Router in Bridge mode Unable to Obtain IP Address from iiNet Network
Configuring the Vigor2860L and Vigor2925L for LTE Internet access
Video – Configuring the Vigor2860L and Vigor2925L for LTE Internet Access
How to Connect a DrayTek Vigor2760 router to TPG NBN
How to Connect a DrayTek Vigor2830 router to TPG NBN
How to Connect a DrayTek Vigor2912 router to TPG NBN
How to Connect a DrayTek Vigor2960 router to TPG NBN
How to Connect a DrayTek Vigor3900 router to TPG NBN
Configuring Vigor2760 for VDSL Bridge mode
Troubleshooting LTE Connectivity Issues with DrayTek LTE Routers
Configure 4G Netgear 320U on Draytek Vigor 2830
Connecting Vigor2760 to Exetel VDSL2 (PPPoE)
How to Connect DrayTek Vigor router to VDSL2 connection on NBN network
Configuring Vigor2860 for TPG VDSL2 NBN Connection
Unable to Access Some Web Sites
Webinar – WAN Connectivity Options
Video – How to Configure the DrayTek Vigor2860 and Vigor2925 Routers for 4G USB WAN Connections
Video – Connecting a DrayTek Vigor Router to the Internet via ADSL
Video – How to Configure the DrayTek Vigor2760 Delight Router for Ethernet WAN
Connecting Vigor2912 to 4G USB modems
Video – How to Connect a DrayTek Vigor2925 Router to DoDo NBN
How to Connect a DrayTek Vigor2860 router to AAPT NBN
Vigor2960 / 3900 / 300B 4G Configuration
Configure Vigor2760 for 4G Modem
Vigor2860 / 2925 4G Configuration
How to Connect a DrayTek Vigor2912 router to DODO NBN
How to Connect a DrayTek Vigor300B router to DODO NBN
Configuring Vigor2760 Delight for iiNet NBN Connection
How to Connect a DrayTek Vigor2925 router to DODO NBN
Configuring Vigor2760 Delight for Ethernet WAN Connection
Video – Configuring ADSL connection in DrayTek Routers
Video – Configuring BigPond 3G with Vigor 2820 router
Vigor2960 Series Bigpond 3G Setup
How does WAN IP and Remote Gateway IP work?
Configuring Transparent Mode in VigorPro5510
Configuring the Vigor120 Router for Bridge Mode
Adding LTE Connection to a Broadband Router using VigorLTE 200 or Vigor2620L in LTE Bridged Mode
How to “Disable Load Balance” for Specific WAN traffic
Transitioning Phone Services to the NBN
Configuring Vigor2620 LTE Series Router for 4G LTE Connection
Configuring VigorLTE 200 Series Router for 4G LTE Connection
How to setup DSL (VDSL/ADSL) bridge mode on Vigor2860
How to setup WAN2 primary and LTE failover (VigorLTE 200)
How to Enable Ethernet WAN port on Vigor2620L Series Routers
Configuring the Vigor2862L and Vigor2926L for LTE internet access
Configuring the Vigor2865L / 2866L and Vigor2927L for LTE Internet access
NBN VDSL2 Connection Update
How to Bridge Virtual WAN on DrayOS?
How to Configure IPv6 on WAN interface?
How to configure Vigor2620Ln for VDSL bridge mode
How to Configure the DrayTek Vigor167 for PPPoE
Bridge Mode Vigor167 accessible on the LAN, WAN and ACS3
Configuring the DrayTek Vigor167 for Modem Mode- Application notes
How to enable SNMP in DrayTek Vigor130
Slow Connections to Australian ATO Website
Setting up STARLINK with Vigor2135ax
How to solve Starlink connection dropping intermittently and only a reboot will restore the connection to the internet
Using STARLINK Internet with DrayTek Vigor Routers
Configuring the Vigor2865L-5G and Vigor2927L-5G for 5G Internet access
How to Configure the DrayTek Vigor167 for Bridge Mode-short Video
How to Set up a DrayTek Vigor2620Ln in VDSL Bridge Mode
How to Configure the DrayTek Vigor2865 LTE router for WAN Failover
How to Configure LTE on DrayTek 2865L, 2866L & 2927L routers
Mobile Broadband (5G/4G LTE)
NBN

Wireless LAN

115

How to deploy a Wi-Fi network-TW
Use the Router as a RADIUS Server-TW
Show VigorAP and VigorSwitch as Sub-Device of a Router-TW
What is Isolate Member with IP?-TW
Use different SSIDs for 2.4G and 5G WLAN but allow access to each other-TW
Operation Modes of VigorAP-TW
Use VigorAP as a RADIUS Server-TW
Wi-Fi Roaming with VigorAP-TW
Blocking Unauthorized Wireless Clients-TW
Add a Separate Wireless Network for Guests-TW
How to set up a mesh network on VigorAP using the Quick Start Wizard-TW
How to set up a mesh network on VigorAP using DrayTek Wireless App-TW
How to Isolate WiFi Guests from the LAN?-TW
Backup and Restore VigorAP Configuration Files with VigorConnect-TW
Upgrade VigorAP’s Firmware with VigorConnect-TW
Add VigorAP to VigorConnect-TW
Provisioning Wireless setting to VigorAP by VigorConnect-TW
How to Allow Routing Subnet to Access VPN-TW
Allow Hotspot User to Login via Receiving PIN code by Mail-TW
How to set up a Vigor Wireless Router as a Mesh Root-TW
Upload Firmware to the VigorAP via TFTP-TW
How to set up Wi-Fi Mesh Networks using Preferred Uplinks and Auto Reselect-TW
Create Facebook APP for Hotspot Web Portal-TW
Tips for setting up Mesh network-TW
Use Purple WiFi as the External Hotspot Portal Server-TW
How to set up Purple WiFi as an external Hotspot Portal Server (For VigorAP 1060C/960C/AP912C/903)-TW
Use VigorAP as a Wireless Range Extender-TW
Using WPA2-PPSK on your VigorAP-TW
How to set up a Wireless MESH network using DrayTek Vigor2865Lac and Access Points AP 903 & AP 802
How to solve issues of disappearing SSIDs on the 2136ax
How to Configure the Vigor Router Hotspot for Social Media Authentication-DrayOS4
Video- How to set up 2 x Draytek AP 918R in a range extender mode.
How to configure Wi-Fi access on Vigor2136ax
Is the 2700Ge Antenna removable?
What is the Packet Overdrive function on the 2700Ge?
Why do wireless Vigor routers have 2 aerials?
My wireless utility doesn’t support WPA. How can I use WPA?
Can I use WPA with a Windows 2000 PC?
Utilities for troubleshooting Wireless LAN
My laptop does not automatically reconnect to my WLAN after it resumes
My laptop or PC cannot connect by wireless to my router
What is the actual speed I can expect from wireless?
12 tips for improving your wireless network
Should I use Wired or Wireless Network?
What is the range of a wireless network?
Using Multiple SSIDs in Vigor Routers
Selecting Wireless LAN Channels
Configuring Wireless Security in Vigor Routers
Configuring and using Access Point Management in Vigor2860 & Vigor2925 Routers
How DrayTek’s Wireless WAN feature can benefit your business
Wi-Fi Roaming and how to use it on VigorAP
Wireless LAN Troubleshooting Tips
How to connect Vigor Wireless Router to two Vigor APs by Bridge-WDS mode?
How to setup LAN and WAN connections via wireless with 2 APs
How to configure the Vigor2710ne router to be used as an access point
How to Configure Internal RADIUS Server in DrayTek Routers
How to Disable the WLAN ON/OFF/WPS Switch in Vigor Wireless Routers and Vigor Access Points
How to Restrict some HTTP and HTTPS Web Sites for Wi-Fi Guest Users
AP910C Firmware Upgrade from v1.1.3.2 to v1.1.5 – Important Information
Video – Configuring and using Access Point Management in Vigor2860 & Vigor2925 Routers
How to Configure Point to Multi Point Bridging Between Multiple Wireless Access Points
Webinar – DrayTek’s Latest Solution for Multiple Wi-Fi AP Deployment
Configuring the VigorAP 800 as a Wireless Repeater
How to Configure Point to Point Bridging Between Two Wireless Access Points AP900
What is Airtime Fairness?
Why do we need 802.11ac?
How to Use Multiple SSID / Multiple subnets on Access Point
AP800 Universal Repeater settings using Vigor2130 Router
Configuring DrayTek Vigor2830 for limited Guest Wi-Fi access
Configuring Guest Wi-Fi LAN in Vigor2820
Vigor2830 WAN Failover Configuration
AP800 Universal Repeater settings using 2700VG
AP800 WDS Procedure
Configuring 2820 as an access point
AP Bridge-Point to Point
DrayTek 2710ne – Unable to Access LAN resource while on Wireless Mode
How do I configure the built in RADIUS Server on the AP800
iPhone 4 disconnects frequently via wireless connection
Problems with Wireless LAN on Vigor2820Vn/n
Configuring Wireless on the 2600G router
How many wireless devices can connect using the Access Control list?
Does the Vigor2820n/Vn router support PEAP for WIFI Security/Authentication?
How can I extend the range of my DrayTek Wireless?
Cannot Ping PCs on another Wireless SSID
Can the Country Wireless Setting be changed in Vigor Routers?
Can I add wireless LAN to a DrayTek router?
2820Vn Wireless Shutdown
What is WMM?
What is Wi-Fi Protected Setup (WPS)
What is WPA, and is it better than WEP?
What is WDS?
What is WEP?
What is the difference between the two WDS Modes (Bridge & Repeater Modes)?
What is Roaming?
What is Infrastructure Mode?
What is APSD?
What is Ad Hoc Mode?
What are WLANs?
How many wireless stations can be associated with a DrayTek wireless router?
802.11r Fast Roaming Using VigorAP 903
VigorAP 802 as a Wi-Fi Extender between Two DrayTek Access Points
How to Create Wi-Fi Mesh Connection using Wired Uplink Mode
Tips for Setting up Wi-Fi Mesh Networks
AP-based Access Point Management (APM)
How to login to a Vigor Access Point
Mesh compatible DrayTek access points with the current routers and APs-Matrix
Resolving Mesh Node Login Issues After Vigor2865 /2866 Upgrade to Version 4.4.3.2
How to set up a Wireless MESH network using DrayTek Access Points AP 903 – using WEB UI – Wizard -Wireless APP
How to Set up a Hotspot Web Portal with Click Through Login on a DrayTek Router
MESH

Routing & NAT

112

Use Port Redirection to access a LAN server from the Internet-TW
Use Open Port to access a LAN server from the Internet-TW
Introduction to Route Policy-TW
Forward traffic to another Internet Gateway Router-TW
Adjust NAT Session Timeout Value by CLI-TW
Address Mapping by Route Policy-TW
Designate the outgoing WAN for LAN Subnet-TW
Redirect FTP Traffic to an Internal Server-TW
Designate a outgoing WAN for traffic to a certain Website-TW
Differences among Port Redirection, Open Ports and DMZ-TW
Routing Fundamentals-TW
Enable ALG (Application Layer Gateway) on Vigor Router-TW
Set up BGP Routing between Vigor Routers-TW
What is Fast Route and when to use it? (For Vigor3900/2960)-TW
How to use iPerf to measure the WAN speed of a DrayTek router.
How can I ensure that DHCP always issues the same IP Address to one computer?
What LAN IP Address should I use?
I can neither map shared disks nor see other computers in my network neighborhood, although I can successfully ping them, what should I do?
When I try to access my router or other device on LAN I instead get a message from my ISP
My laptop associates to the access point, but DHCP fails to give an address. DHCP is working fine for all physically connected devices.
How can I Port Forward one Port to multiple LAN devices?
How does NAT act as a firewall?
What is Vigor2910 NAT Port Range Forwarding?
My LAN includes PCs with both Public and Private IP Addresses; and the Public IP PCs are not able to browse or ping the servers
Can I Connect Two (or more) Computers to the Internet?
How do I set a Hostname for the Draytek router?
How to configure Dynamic DNS
What is the VLAN Facility?
Vigor3300 WAN and DMZ ports
Vigor3300 DMZ port
UDP session timing out
How to configure Bind IP to MAC for wired and wireless PC
How to Customise DHCP Options
How to set option 66 (TFTP) in DHCP
How to configure Multi-Subnet in Vigor2830
How to Change LAN port Settings in Vigor3300 Router
Unable to Play Online Game – “Call of Duty/Modern Warfare”
Port Redirection on Multi-Wan Router
How to Configure TCP Protocol Timeout Setting in the Vigor2820 router?
How to change the DHCP Lease Time in Vigor Router
How do I set the Domain Name Issued by the DHCP Server?
How to Set up Second Subnet on Vigor3300V and use DHCP
What is Dynamic DNS (DDNS)?
ATO Firewall ports required for ELS application
How to Enable and Disable http access on port 443 on Vigor2950 with SSL VPN Feature
How do I set up Vigor Router to use Netmeeting?
What is NAT loopback & is it Supported in Vigor Routers?
How to Block all ports for 192.168.1.0 subnet 255.255.255.0 and allow single IP to access telnet for 3300/v
Why don’t Draytek routers support MTU1500 for PPPoA?
My router cannot update the new IP on DDNS, I always get a message “Send HTTP request error” on View Log
WOL Feature in Vigor2830
How to block all ports and open just certain ports direction is LAN to WAN
How to open UDP 5060 port to the internal SIP server behind Vigor VoIP routers
How to Set up Public IP Alias Address as Source Address for Mail
IP Alias Questions on 2820
Why am I Unable to Connect to my Mail Server via HTTPS from the Internet?
[Vigor3900] How to set up multiple LAN subnets with port-based VLAN
[Vigor3900] How to have more than one subnet in a LAN profile
What’s the difference between DMZ Host and DMZ Subnet?
Example of 2nd subnet routing
[Vigor3900] How to configure an IP Routing subnet (using the same LAN Ports)
How to set up a Vigor2952 as a PPPoE server for LAN clients
How to configure Bind IP to MAC in DrayOS Routers
How to configure Bind IP to MAC in the Vigor3900
What is LAN IP Alias and how do you use it?
How to use a Public IP address on a LAN
How to configure DHCP for LAN clients in Vigor Routers
What is Port Triggering and How to Use it
Creating 802.1Q VLANs on Vigor2860 and DrayTek Smart Switch
Adjusting NAT Session timeout values in DrayTek Routers
Configuring Vigor Router Firewall using Objects to allow RDP Access from one Source IP Address
How to Pass Second WAN IP address to another Router connected to Vigor2952 LAN
How to Enable WAN Aggregation on DrayTek Routers
How to resolve dyndns not working on 2860n+
Video – Setting up Port redirection on Vigor Router
Changing Default LAN IP Address in Vigor2860/Vigor2925
VLAN Tag Priority Settings in Vigor2830 Router
Enabling 2nd Subnet and VLAN in Vigor2760 Router
Questions on Configuration of IPSEC tunnels, routing and QoS
Configuring Vigor2920 or Vigor2830 for WAN Failover
How to configure the 2830 to Failover from WAN1 to WAN2 then WAN2 to WAN3
Load Balance Policy Inbound and Outbound Traffic
Load Balance Policy to Send SMTP Mail via Required WAN Port
IP camera and how to change HTTP port 80
Workaround for Vigor2820 session limit bug
Yahoo videos are blocked by the 2800
How many individual port forwarding entries are allowed on DV2750 series routers?
How to Turn Off Auto Failover
How to “Disable Load Balance” for Specific WAN traffic
How to Use Open Ports – For Email Server
How to use Port Redirection
What are the differences between Port Mapping, Open Ports and DMZ?
How to setup WAN 1 as primary and LTE failover (Vigor2865L Series)
How to configure LAN to LAN Static Route using DrayTek Routers
How to assign an IPv6 address to LAN clients?
How to Use NAT in Draytek Routers
Setting up Port Redirection using WAN IP Alias
Redundant WAN and LAN Connections for Two-Router Network Failover
How to Configure the DrayTek Vigor2865 LTE router for WAN Failover
Load Balance & Route Policy

VigorACS 2 / ACS 3

102

How to set up API access for the DrayTek ACS 3 platform.
SOAP Web Service API
RESTful web service API for DrayTek ACS 3
Some additional info on the ACS 3 cloud accounts.
Backup the Database of VigorACS by the script-TW
Install VigorACS 3 on Linux-TW
Install VigorACS 3 on Windows-TW
Activate/Renew License Key and Add Extension Key for VigorACS-TW
Upgrade VigorACS SI to VigorACS 2 on Windows-TW
Check Clients of Certain Period by VigorACS-TW
List All the TR-069 Parameters and Their Value-TW
Upgrade VigorACS SI to VigorACS 2 on Linux-TW
Register a Vigor Router to VigorACS-TW
Register a VigorAP to VigorACS-TW
Disable Validation Code Check for VigorACS Login-TW
File Manager of VigorACS-TW
Get the Report of All the CPE’s Management Port-ACS2-TW
Troubleshoot Unstable CPE Status-TW
Show Router Name in the Device List of VigorACS-TW
Change the Location of CPE or Network on VigorACS-TW
Schedule CPE to reboot periodically via VigorACS-TW
Reset CPE Password by VigorACS-TW
Backup and Restore CPE’s Config via VigorACS-TW
Authenticate Hotspot User with External RADIUS Server-TW
Introduction to VigorACS Dashboard-TW
Backup the Database of VigorACS-TW
What Can I Do if I Forgot MySQL password?-TW
Upgrade CPE’s Firmware via VigorACS-TW
Restore SQL File to VigorACS Database-TW
Upgrade VigorACS 2 on Windows-TW
Upgrade VigorACS 2 on Linux-TW
Create Global Parameter Profile by Sampling-TW
Get Google Map API Key for VigorACS-TW
The comparison table of User Role on VigorACS-TW
Construction of the NETWORK and CPE MENU on VigorACS-TW
Enable Two-factor authentication for VigorACS 2-TW
Configure WAN and VPN alarm on VigorACS-TW
Change VigorACS server port-TW
Register a VigorSwitch to VigorACS-TW
How to configure individual CPEs by using a pre-configured XML file through VigorACS- TW
How to configure multiple CPEs with an XML file through VigorACS-TW
How to get notified on VigorACS when someone has changed the settings of the registered router-TW
Notes on how to upgrade ACS3 linux to Version 3.8.2
How to set up ACS 3 as an external Hotspot Portal Server-TW
Use TOTP as Two Factor Authentication (2FA) for Remote Access-TW
Using VigorACS 3 to Enable SD-WAN Network-TW
How to set up VPN tunnels between registered Vigor Routers by SD-WAN on ACS 3-TW
Upgrade VigorACS 2 to VigorACS 3 on Windows-TW
Monitoring Application Usage with VigorACS 3-TW
Upgrade VigorACS 2 to VigorACS 3 on Linux-TW
Upgrade VigorACS 3.3.1 on Windows-TW
Upgrade VigorACS 3.3.1 on Linux-TW
Displaying Router Netflow data on VigorACS by using VigorConnect as Netflow Collector-TW
Upgrade VigorACS3 by OTA on Linux-TW
Upgrade VigorACS3 by OTA on Windows-TW
What happens to ACS licensing when Azure VM changes its MAC address?
How to fix the issue when the Console of VigorACS 3 goes back into a loop after typing the login password
How to install ACS3 on AWS
How to fix VigorACS 2 Login issue due to license key synchronization Error
Some troubleshooting tips when setting up TR069 in VigorACS2/ACS3
How to install VigorACS 2 in Google Cloud
How to install Vigor ACS 2/ ACS 3 in Azure Cloud
VigorACS 2 Reporting
Webinar – DrayTek VigorACS SI – Features and Benefits – January 2017 Recording
How to install VigorACS 2 in AWS Cloud
Video – How to Register a CPE device into DrayTek VigorACS3
Video – Creating VPN tunnels using DrayTek VigorACS SI
Configuring VigorACS-SI for 30 Day trial License
How to display logs on TR-069 (ACSSI) for support engineers analysis
Some notes on installing ACS SI
Getting Status Reports of Managed CPE Devices Using VigorACS 2
How to add an SSL certificate to Draytek Vigor ACS2
Router Performance with TR-069 Updates Using VigorACS 2
Vigor ACS 3 Frequently asked Questions (FAQ)
How to Access CPE Devices Behind NAT using VigorACS 3
How to use AutoVPN and VPN Monitoring using SDWAN in Draytek VigorACS3
How to change all the system settings in VigorACS 3
How to add the Google API or leaflet API in VigorACS3
How to use provisioning in Draytek VigorACS 3 to replicate configuration of similar routers in the network
How to prepare scheduled tasks on Draytek routers using VigorACS 3
How to create reports in Draytek VigorACS3
How to Monitor devices using Draytek Vigor ACS3
How to add a New User in Draytek Vigor ACS3
Video-How to add a new CPE to Vigor ACS 3
How to add a network in ACS 3
Vigor ACS3- All features explained
DrayTek Vigor ACS 3 Webinar Series
How to Install ACS 3 version 3.4.0 under UBUNTU
How to capture NetFlow data using VigorACS 3
Fixing VigorACS 3 Login Page Loading Issues: A Step-by-Step Troubleshooting Guide
How to recover Mariadb password in Windows .
What happens when ACS 3 does not show graphs even if InfluxDB is working
How to set the time in ACS 3 server – Linux
How to install VigorACS 3 using OTA under Windows O/S
How to install VigorACS3 V3.5.1 using OTA under Linux O/S
How to solve Access Points Showing offline error after updating VigorACS Server
How to solve issue when View only operators cannot see any devices in ACS 3 server
What to do when ACS 3 server will not appear in browser
How to use AutoVPN and VPN monitoring in VigorACS 3
How to Reset the Admin Password on CPEs using Global Parameters in VigorACS 3
How to install a DrayTek VigorACS 3 under Linux O/S
How to install DrayTek VigorACS 3 on Windows O/S

VPN & Remote Access

231

Allow VPN Access Only from Specific Countries Using GeoIP Object
IPsec VPN between Mikrotik and Vigor Router-TW
Add a Failover VPN Connection-TW
Authenticate Remote Dial-In VPN Clients with RADIUS Server-TW
Authenticate SSL VPN Client by Windows 2008 R2 RADIUS Server -TW
Dead Peer Detection (DPD) for IPsec-TW
VPN Pass-Through Setup-TW
PPPoE Pass-Through Setup-TW
How to use Central VPN Management (CVM)-TW
IPsec VPN with X.509 Authentication from Windows to Vigor3900/2960 by Smart VPN Client
Troubleshoot VPN Not Connecting-TW
GRE Tunnel between Cisco and DrayTek Router-TW
SSL VPN from Windows to Vigor Router-TW
Back up a leased line by VPN-TW
PPTP VPN from Windows Smart VPN Client to Vigor Router-TW
IPsec VPN between FortiGate and DrayTek-TW
802.1X Authentication for Windows Client without Server Certificate-TW
IPsec VPN between Cisco ASA and Vigor3900/2960-TW
Use the Router’s Internal RADIUS Server for 802.1X Authentication-TW
Use the DHCP server on Vigor3900/2960’s LAN for VPN dial-in clients-TW
L2TP over IPsec from Windows 7 to Vigor Router-TW
Authenticate Remote Dial-In VPN Clients with AD/LDAP Server-TW
L2TP over IPsec from Windows 10 to Vigor Router-TW
Vigor3900/2960 Hotspot Setup for SMS Login-TW
Connect VPN on Demand with iOS Smart VPN app-TW
Troubleshoot Unstable VPN-TW
Create multiple Phase 2 SA for IPsec tunnel to connect multiple subnets in one VPN profile-TW
Troubleshoot VPN is up but no traffic-TW
IPsec Tunnel Aggresive Mode between DrayTek Routers-TW
IPsec Tunnel Main Mode between DrayTek Routers (Client with Static IP)-TW
IPsec Tunnel Main Mode between DrayTek Routers (Client with Dynamic IP)-TW
SSL VPN from Android Phones to Vigor Router-TW
L2TP over IPsec VPN between DrayTek Routers-TW
Dial VPN with mOTP authentication using Windows Smart VPN Client-TW
Dial VPN with mOTP using a token device-TW
Make specific host use VPN tunnel as the default gateway-TW
Assign a Fixed IP Address to Remote Dial-in VPN Clients-TW
IPsec VPN between SonicWALL and Vigor Router-TW
IPsec VPN between Cyberoam and DrayTek-TW
Lower VPN MSS to access the peer router’s Web UI through VPN-TW
SSL VPN from macOS to Vigor Router-TW
Difference between Certificate Verify Level of Smart VPN iOS APP-TW
Dial VPN with mOTP authentication using iOS Smart VPN Client-TW
Add a Load Balance VPN Connection-TW
SSL VPN from iOS to Vigor Router-TW
Difference between VPN in Route and NAT mode-TW
Single-Arm VPN Configuration-TW
PPTP VPN from Ubuntu to Vigor Router-TW
IPsec VPN between a DrayOS router and a Vigor3900/Vigor2960-TW
Why can I see Vigor Router’s Web Login Page from WAN by HTTPS when “Allow management from the Internet” is disabled?-TW
PPTP VPN between DrayOS Router and Vigor3900/2960-TW
IPsec VPN between Cisco RV Series and DrayTek-TW
IKEv2 VPN between DrayTek Routers-TW
GRE Tunnel between Teltonika RUT950 and DrayTek-TW
IPsec VPN between Netgear and DrayTek Router -TW
PPTP VPN between DrayTek Routers-TW
IKEv2 VPN from macOS to Vigor Router-TW
IPsec VPN between Zyxel VMG and Vigor Router-TW
Restrict Remote VPN Network’s Access to Specific IP-TW
Set up Vigor3900/2960 as an OpenVPN server using local user database-TW
IKEv2 VPN with EAP Authentication from macOS to Vigor Router-TW
IPsec XAuth from iOS to Vigor Router-TW
IPsec XAuth from macOS to Vigor Router-TW
IPsec XAuth from Android to Vigor Router-TW
Choose the Best VPN Protocol-TW
L2TP over IPsec VPN from Ubuntu to Vigor Router-TW
IPsec VPN between Google Cloud Platform and DrayTek-TW
OpenVPN Setup on Vigor Router with XCA-TW
IKEv2 VPN between Microsoft Azure and Vigor Router-TW
Assign a fixed IP address for the remote VPN peer router-TW
IPsec VPN from Windows to Vigor Router by Smart VPN Client-TW
IKEv2 VPN with EAP Authentication from Windows to Vigor Router using Let’s Encrypt-TW
IKEv2 VPN with EAP Authentication from macOS to Vigor Router using Let’s Encrypt-TW
IKEv2 VPN with EAP Authentication from iOS to Vigor Router using Let’s Encrypt-TW
IPsec VPN between Amazon VPC and DrayTek Router-TW
Export the Smart VPN profile to other computers-TW
IPsec XAuth from Windows to Vigor Router -TW
IPsec VPN from Windows to Vigor Router using Aggressive mode-TW
SSL VPN between DrayOS Router and Vigor3900/2960- TW
SSL VPN between two DrayTek Routers -DrayOS 4 -TW
L2TP over IPsec from Android to Vigor Router-TW
How to block an unknown IP address which keeps dialing VPN to Vigor Router-TW
How to send all the traffic to VPN tunnel on Vigor3900/2960-TW
Restrict VPN access to certain subnets or devices for Remote Dial-in users.-TW
IKEv2 VPN with EAP Authentication from Windows to Vigor3900 by using the self-signed certificate-TW
How to fix the SSL VPN connection error after upgrading to iOS 13 and macOS 10.15-TW
Why TCP Port 443 is opened on WAN when the Allow management from the Internet option is disabled?-TW
How to use Digital Signature (X.509) to authenticate IPsec VPN between a Vigor3900/2960 and Vigor Router -TW
How to use Digital Signature (X.509) to authenticate a LAN-to-LAN IPsec VPN between Vigor routers-TW
What is VPN Matcher and how to use it-TW
How to establish Host to LAN VPN with VPN matcher-TW
IKEv2 EAP between NordVPN and Vigor Router-TW
OpenVPN to Vigor Router by using the self-generated certificate-TW
IPsec VPN between Mikrotik(RouterOS v6.47) and Vigor Router-TW
How to access remote VPN network without login in User-Based mode-TW
Port Redirection over VPN to a host on the remote network-TW
Apply NAT inside IPsec VPN to match Remote Network’s Firewall Policy-TW
OpenVPN between DrayTek Routers -TW
Prioritize VPN Traffic by QoS-TW
OpenVPN between NordVPN and Vigor Router-TW
IKEv2 VPN with EAP authentication from iOS to Vigor Router-TW
Use mOTP for Remote Access-TW
Solve the Can’t find VPPP adapter Error of Smart VPN Client-TW
Allow VPN Remote Dial-In connections only during Working Hours-TW
How to create an IPsec VPN tunnel between two DrayTek Vigor2136 having the same LAN subnets-DrayOS 5 routers
OpenVPN between Vigor Router and OpenVPN Access Server-TW
Restrict Remote VPN Connection from a Specific Domain name -TW
Limit a VPN account be connected by one remote user only-TW
How to approach zero trust network with Vigor routers-TW
Generate Multiple WireGuard VPN profiles at once by Vigor3910/2962-TW
Dial VPN with TOTP Authentication-TW
WireGuard VPN between Vigor Routers-TW
WireGuard VPN from macOS to Vigor Router-TW
OpenVPN between pfSense and Vigor Router-TW
IKEv2 VPN between pfSense and Vigor Router-TW
IKEv2 VPN from Android to Vigor Router-TW
What to do when an Undesired route is added after VPN is up-TW
How to use basic CLI commands on DrayOS 5 routers
How to create an IPsec VPN tunnel using the same IP subnet between two DrayTek routers-DrayOS 4- Routers
How to set up a LAN to LAN IPsec VPN tunnel between DrayOS 4 and DrayOS 5- between 2136 and 2962
How to set up a LAN to LAN IPsec VPN between Vigor 2136 and Vigor 2962
How to secure NAT Port Redirection using Port Knocking on DrayOS 5 Routers
Using Port Knocking to Protect Access to the Router Management Interface on DrayOS4 routers.
How to configure an OpenVPN tunnel on a DrayTek Vigor2136 with SmartVPN client in Windows
How to create an IPsec Tunnel using Pre-shared key on a Vigor2136 and SmartVPN client
How to set up IPsec IKEv2 EAP for EasyVPN from Windows on DrayOS 5 routers
How to configure EasyVPN on a DrayOS 5 router – Vigor C510
How to create an IPsec LAN to LAN VPN tunnel between a Vigor2136 and a Vigor2927
Establishing an IPsec Tunnel in Main Mode between two Vigor2136 Routers (Client with Dynamic IP)
How to export and import SmartVPN client configuration
VPN Troubleshooting Tips
How can I create a IPSec VPN if I don’t have a static IP address at each end?
How to connect IPSec with X.509 from smart VPN client 3.22 to Vigor2800
How to configure IPSec VPN tunnels with the Vigor3300 where the remote endpoint has a dynamic public IP address
My LAN-to-LAN VPN connects, but no data seems to be going through it
Tips and tricks for VPN
How many simultaneous software VPN sessions that Draytek routers are capable of pass through?
Hub and spoke VPN to access other branches via Head Office
I need help with VPN on Vigor3300V
How do I setup syslog over VPN?
On Vigor3300 VPN, where/how do we set the remote and local IPSec identifier?
Where can I find information on how to configure VPN settings on my Vigor3300/V?
Configuring PPTP VPN Remote Dial-in Connection to Vigor3300
Does The Vigor3300 Support IPSEC VPN Pass Through?
How to install Smart VPN on Windows 7
Vigor 3300 VPN Issue
PPPoE Passthrough Questions
LAN TO LAN IPSEC with PPPoE passthrough on VPN server
How to block all ports and open just RDP port on a VPN tunnel
How to set up Multiple IPSEC SA’s between the same two hosts when NOT SUPPORTED???
Setting Up PPPoE Authentication on your PC.
Why Can’t I establish L2TP over IPSec tunnel successfully?
Unable to Access Remote Router Web Page over IPsec VPN Tunnel
Can a LAN-to-LAN IPSec VPN Tunnel Work over 3G Network
Cisco IPSEC VPN client does not pass through the router. What should I do?
Host to LAN VPN ( Teleworker to Vigor ) – WinXP to Vigor Router – PPTP – Smart VPN Client
IPSEC passthrough for 3300
IPSec VPN for SnapGear
VPN Load Balance using 3300V
IPSEC VPN Pass-through Connection with Vigor2800 using Cisco VPN3002
What is Dead Peer Detection & which Vigor routers support this?
How to setup IPsec LAN To LAN VPN tunnel main mode between two Vigor Routers
How to connect Android VPN L2TP/IPsec to DrayTek Vigor router?
How to configure LAN to LAN VPN Tunnel to Route all Internet Traffic to Private Internet Access (PIA)(PPTP obsolete – Aug 2022)
Aggressive Mode VPN Connection between SonicWALL and Draytek Router
How to configure firewall filter rules to allow VPN if default rule is set to block all traffic.
Video – Configuring IPsec VPN Tunnel (Aggressive Mode) Between Two Vigor Routers-2925 & 2860
Configuring PPTP LAN-to-LAN VPN Tunnel between Vigor 2860 and Vigor 3900
Configuring IPsec LAN-to-LAN VPN Tunnel between Vigor 2860 and Vigor 3900 Routers using Aggressive Mode
Configuring SSL LAN-to-LAN VPN Tunnel between Vigor 2860 and Vigor 3900 Routers
Using the “Enable Ping to Keep IPsec Tunnel alive” option
VPN IPSec LAN to LAN Draytek 2830 & Netgear FVS336Gv3
VPN IPSec LAN to LAN Draytek 2925 & Billion router
Video – How to Set Up IPsec LAN To LAN VPN Tunnel Main Mode between Two Vigor Routers
Video – How to set up LAN to LAN PPTP VPN connection Vigor Router to Vigor Router
Webinar – Central VPN Management
Webinar – Latest Cost Effective NBN Ready Broadband VPN Firewall Router Solution
Video – How to Use Central VPN Management (CVM)
Video – How to Setup IPsec VPN Tunnel (Aggressive Mode) Between Two DrayTek Vigor Routers-2925 & 2860
How to Create an IPSec Tunnel (Main Mode) Between Vigor3300V and Vigor3900 Routers
How to configure SSL VPN on Vigor 2925 using RADIUS authentication on Windows 2008 server
How to Setup IPsec VPN Tunnel to Allow Branch Office Networks to See Each Other
How to setup GRE over IPSec LAN to LAN VPN Tunnel on Vigor2760
How to configure L2TP on IPhone and 2910 with 3.2.4_RC5 firmware
How to setup iPhone to 3200 via PPTP VPN
IPSEC Smart VPN Client Problem
IPSEC VPN Configuration between Vigor2820 and Cisco VPN Concentrator 3080
IPSEC VPN Hints for Vigor2130 Router
LAN to LAN IPSEC VPN Tunnel Between Vigor2820 router and D-Link DSL-G804V Router
LAN to LAN IPSec VPN between Vigor2130 and Vigor2820 using Aggressive mode
Questions on Configuration of IPSEC tunnels, routing and QoS
Setting L2TP over IPSEC for iPhone 4 with OS version 4.3.3
Slow VPN Connection Between Two Sites
VPN Compatibility with iPhone (3,3GS and 4)
What is the meaning of WAN IP and Remote Gateway IP as used in LAN to LAN VPN configuration in TCP/IP settings?
Configuring Vigor2820 to use MTU size of 1500 for PPPoA
How to configure Host to LAN VPN on a Windows 7 PC with Smart VPN client ver. 4.0.0.5.
How to configure Draytek to Cisco PIX VPN with multiple subnets.
How to Analyse VPN IPSec Logs
LAN to LAN RIP Direction Setting
Explanations of LAN-to-LAN VPN Timeout Values
Can a LAN to LAN VPN connection be established if one end has a dynamic IP address?
UDP Broadcast over a VPN connection
How to configure OpenVPN in Vigor Router using XCA certificate and key management
Troubleshooting Unstable VPN Connections
OpenVPN set up on Vigor Router DrayOS XCA
How to setup VPN Matcher with DrayTek routers
IKEv2 EAP VPN Log Analysis
Client cannot open the router’s web interface if remote dial up VPN PPTP is used
Why VPN Connection to NordVPN with IKEv2 EAP protocol Cannot be Established?
Troubleshooting tips for VPNs not connecting
How to Solve SmartVPN Issues
When connected to a VPN the remote site can be accessed by IP address but not via hostname?
11 Common Mistakes When Creating VPN Connections
VPN Troubleshooting Tips
How to Avoid IPsec VPN Dial-Up Failure
L2TP over IPsec VPN compatibility with iOS14
How to create an OpenVPN Dial-in Connection
SSL VPN not Working on Apple macOS devices
How to use Smart VPN using 4 Types of Encryption
How to create VPN load balancing on Draytek routers
How to use Draytek SmartVPN with OpenVPN encryption
Using mOTP on iPhone for SSL VPN tunnel
How to solve SSL VPN not working after Android13 Upgrade
How to create an IKEV2 EAP VPN Tunnel between a DrayTek 2865 and a NordVPN Server
VPN Remote Dial-In 2FA SMS Code
How to use DrayTek SmartVPN with OpenVPN encryption with ToTP and VPN Matcher
How to setup SmartVPN client with OpenVPN, TOTP and VPN Matcher
How to solve the issue where WireGuard cannot be deselected on some Draytek routers
How to use AutoVPN and VPN monitoring in VigorACS 3
Certificates
- Use a Unique Self-Signed Certificate on the Router-TW

VigorSwitch

37

Setting Up VLAN Tagging on the Q1070x
Introduction to VeriPHY Cable Diagnostic in VigorSwitches-TW
How to limit the number of MAC address to each port interface in a Vigor switch-TW
Deploying VLANs by SWM and VigorSwitch-TW
Copy configurations from one Switch to the other by Vigor3900’s Switch Management-TW
Introduction to IP Conflict Prevention of VigorSwitch-TW
Differences between Switch types-TW
Use Link Aggregation to increase bandwidth and redundancy between Vigor Switches-TW
How to use MAC VLAN on VigorSwitch?-TW
Register a VigorSwitch to VigorACS-TW
How to add VigorSwitch into the VigorConnect server and set up VLANs-TW
How to set up QoS and Voice-VLAN on Vigor Switch-TW
How to set up DHCP Server on VigorSwitch-TW
How to set up DHCP Relay on VigorSwitch-TW
STP introduction and how to set up STP on VigorSwitch-TW
Vigor Switch Naming Rules-TW
VLAN Routing on Vigor L2+ Switch
Video- DrayTek Stacking switch features with P2282x
Is Link aggregation of Draytek 2962 compatible to the LACP of Sophos XGS firewall ?
Overview – VigorSwitch P1282 & G1282
VigorSwitch P2100 & G 2100- Overview
Default IP Address – Method to Web and Cli Access Management of DrayTek G2260
Creating 802.1Q VLANs on Vigor2860 and DrayTek Smart Switch
Configuring 802.1Q VLANs on Vigor3200 and Planet Smart Switch
Creating 802.1Q VLANs between Vigor2960 and Cisco SCG300-28PP Switch
Default IP Address – Method to Web and Cli Access Management of DrayTek G2260
Configuring 802.1Q VLAN on Vigor3900 and DrayTek Smart Switch
Creating 802.1Q VLANs on Vigor3900 and Planet Smart Switch
How to Enable QinQ 802.1ad – VLAN Tunnelling in DrayTek VigorSwitch
Differences between DrayTek VigorSwitch Types
DrayTek VigorSwitch Naming Convention
Creating 802.1Q VLANs on Vigor3220 and Cascaded DrayTek VigorSwitch G1280
How to Regain Access to VigorSwitch if Management VLAN Changed
Introduction to Spanning Tree Protocol in VigorSwitches
How to set up DHCP Server in VigorSwitch
Recovery for VigorSwitch G1282 after firmware update failure
Naming Rules for DrayTek VigorSwitches

IPV6

1

Testing the Vigor2850Vn Router with IPv6

Virus and Vulnerabilities

10

DrayTek WLAN Driver Vulnerabilities Nov 2025
DrayTek Router-Use of Uninitialized Variable Vulnerabilities (CVE-2025-10547)
How do I upgrade the firmware on my Vigor router?
DrayTek routers rebooting- How to solve this issue
Notice from DrayTek about latest Vulnerabilities CVE-2024-41583 ~ CVE-2024-41596
DrayTek Router unauthenticated remote code execution vulnerability (CVE-2022-32548)
Notice from DrayTek about latest Vulnerabilities CVE-2024-41334 to 41340
Notice from DrayTek about latest Vulnerabilities CVE-2024-51138 and CVE-2024-51139
Security Tips for Vigor Routers
Security Alert – CSRF Vulnerability and how to Prevent Attacks

USB

11

Capture full Syslog about the USB Modem-TW
Additional Notes on USB dongles tested on DrayTek Routers
How to configure the Vigor 2136 using the new DrayOS 5 User interface
Is there a recommended maximum for WLAN connections?
What are the limitations of the USB Printer Port?
My Vigor router does not detect my Printer connected to the USB Printer port
Which printers are compatible with the Vigor router’s USB printer port?
How do I Access USB Storage on my Vigor Router from the Internet via FTP?
How do I configure LPR printing on Linux boxes?
USB disk quick settings
USB Mass Storage – Vigor2910VG

Security

9

Allow VPN Access Only from Specific Countries Using GeoIP Object
Enhance WebUI Security with Validation Code Check
What is DraySOAR from DrayTek ?
DrayTek WLAN Driver Vulnerabilities Nov 2025
DrayTek Router-Use of Uninitialized Variable Vulnerabilities (CVE-2025-10547)
Mastering Zero Trust Network Architecture with DrayTek Routers.
How to configure RADIUS Client on DrayTek Vigor Routers
IAM – Identity and Access Management in DrayOS 5 routers
Security Tips for Vigor Routers

DrayOS 5

40

Setting Up VLAN Tagging on the Q1070x
Setting Up Cloudflare Dynamic DNS on Vigor Router
Allow VPN Access Only from Specific Countries Using GeoIP Object
Enhance WebUI Security with Validation Code Check
How to set up QoS on DrayTek Routers (DrayOS 4 & 5)
Introduction of IAM -TW
Can DrayTek routers implement ARP detect on LTE WAN
How to use basic CLI commands on DrayOS 5 routers
DrayTek Vigor2928be Series Router Overview
DrayTek Vigor2767 Series Router Overview
How to add an eSIM to a Vigor2767ax-4G
Unable to find “Product registration” link in Vigor167
How to add an eSIM to Vigor C510ax – Lte – 5G
How to configure DMZ on a Vigor2136 with a firewall filter – DrayOS 5
How to set the DMZ on a DrayTek DrayOS 5 router
How to configure a routed subnet on a DrayOS 5 router such as the Vigor C510
Mastering Zero Trust Network Architecture with DrayTek Routers.
How to create an IPsec Tunnel using Pre-shared key on a Vigor2136 and SmartVPN client
How to set up IPsec IKEv2 EAP for EasyVPN from Windows on DrayOS 5 routers
How to configure EasyVPN on a DrayOS 5 router – Vigor C510
How to create an IPsec VPN with EAP authentication using a self signed Certificate and Smart VPN client
How to set up 4 SSIDs using VLAN IDs on an access point AP903 using the Vigor 2136ax
How to Configure the WAN interface on a Vigor 2136
How to solve issues of disappearing SSIDs on the 2136ax
Podcast 12- DrayTek DrayOS v5: A Comprehensive Guide
Podcast 9- Configuring Wireless WAN in the Vigor2136ax Router
How to create an IPsec LAN to LAN VPN tunnel between a Vigor2136 and a Vigor2927
Configuring Wireless WAN in the Vigor2136ax Router
How to configure Wi-Fi access on Vigor2136ax
How to Configure Firewall Rules on the Vigor2136 to Block YouTube & Facebook
How to set up the LAN interface and create VLANs on DrayOS5 routers
Establishing an IPsec Tunnel in Main Mode between two Vigor2136 Routers (Client with Dynamic IP)
Wake up your PC by using WoL (Wake on LAN) for 2136 & DrayOS 5
How to change admin password on Vigor 2136 and DrayOS 5 routers
How to create a free DrayDDNS domain name on a Vigor 2136- DrayOS 5 Router
IAM – Identity and Access Management in DrayOS 5 routers
How to configure the Vigor 2136 using the new DrayOS 5 User interface
Introducing DrayOS 5
Security Tips for Vigor Routers
How to set up a WAN on DrayOS 5 – eg 2136

General

769

Setting Up Cloudflare Dynamic DNS on Vigor Router
What is DraySOAR from DrayTek ?
How to use basic CLI commands on DrayOS 5 routers
How to use iPerf to measure the WAN speed of a DrayTek router.
Why is Memory Usage so high in DrayTek routers even before I configure anything?
What could cause a DrayTek router not to access the Time server ( NTP ) to update the system time
The Reliable Ways to Identify the SIM’s ISP (Router‑Only)
How to load the nano SIM card in the DrayTek 2865Lax-5G
How to capture sys ver dbg logs on DrayTek routers
Unable to find “Product registration” link in Vigor167
How to unbind a DrayTek Router from a MyVigor account.
Installing and Using DrayTek VigorConnect Management Software
List of the Knowledge base of DrayTek-Australia -25 Sept 2025
Is Link aggregation of Draytek 2962 compatible to the LACP of Sophos XGS firewall ?
DrayTek Router-Use of Uninitialized Variable Vulnerabilities (CVE-2025-10547)
How to configure the Vigor 2136 using the new DrayOS 5 User interface
How to create an IPsec VPN with EAP authentication using a self signed Certificate and Smart VPN client
How to configure RADIUS Client on DrayTek Vigor Routers
How to configure Radius Client on Vigor Routers- old
New Firmware releases for DrayTek
How do I upgrade the firmware on my Vigor router?
DrayTek routers rebooting- How to solve this issue
Podcast 7- Multi-WAN Load Balancing & Fail over
Podcast 6- DrayTek Router features explained
Podcast 5- Applications of Virtual Local Area Networks (VLANs) using DrayTek routers and switches
Configuring Wireless WAN in the Vigor2136ax Router
Podcast 2- Network Security Overview of DrayTek Routers
Podcast 3- Vigor3912s – Security & applications
What are the Chipsets used by DrayTek routers
How to set up the LAN interface and create VLANs on DrayOS5 routers
Notice from DrayTek about latest Vulnerabilities CVE2024-41583 to 41596
How to test SNMP on Draytek routers
Troubleshooting
Firmware
Getting Started
DDNS
TW

LAN Applications

28

Use Multiple LAN Subnets with Tag-Based VLAN-TW
LAN DNS of Vigor3900/2960-TW
Local Network Setup and Management-TW
Set up the Router as a PPPoE Server-TW
Introduction to Bind IP to MAC-TW
Use a Public IP on LAN using ‘IP Routed Subnet’ Interface-TW
Use a Public IP on LAN using ‘For Routing Usage’ option-TW
How to assign an IPv6 address to LAN clients?-TW
Is Link aggregation of Draytek 2962 compatible to the LACP of Sophos XGS firewall ?
How many network users can the DrayTek Vigor3912 support?
How to set the DMZ on a DrayTek DrayOS 5 router
How to configure a routed subnet on a DrayOS 5 router such as the Vigor C510
Podcast 5- Applications of Virtual Local Area Networks (VLANs) using DrayTek routers and switches
VLAN
DHCP
DNS
- Forward DNS Queries to a Private DNS Server-TW
- Give a Hostname to a LAN server by LAN DNS-TW

Access Points

46

Vigor3900/2960 Hotspot Setup for Guest Profile Login-TW
Connect Detached Network by VigorAP in Bridge-Point to Point mode-TW
Use VigorAP 810 in Station-Infrastructure mode-TW
Client Load Balancing by Central AP Management-TW
Connecting to the Wi-Fi using default password-TW
How to open VigorAP’s management page-TW
PMK Caching and Pre-Authentication-TW
Set up Vigor Router as a wireless repeater-TW
Are Vigor Routers affected by WPS PIN brute force vulnerability (VU#723755)?-TW
802.1X Authentication with Self-Generated Server Certificate-TW
Introduction to VigorAP Mobile Device Management-TW
Vigor3900/2960 Hotspot Setup for SMS Login-TW
Use multiple SSID on VigorAP-TW
What is Band Steering-TW
Use VigorAP as a Universal Repeater-TW
Which channel does Vigor Router use in 40MHz bandwidth mode?-TW
Use 802.1x authentication for Wi-Fi with an external RADIUS server-TW
Troubleshoot Wireless Connection Problem-TW
Join the Wireless Network by WPS-TW
Change Country Code in Beacon Frames-TW
7 Tips to Improve Wi-Fi Performance-TW
Introduction to Interference Monitor-TW
Allow Hotspot User to Get Login PIN code via SMS-TW
Start using Central AP Management-TW
Update VigorAP’s configuration by AP Management (APM)-TW
VigorAP Automatic Provisioning with Vigor Router-TW
VigorAP Automatic Provisioning with Vigor Router-TW
Connecting Vigor Router and VigorAP wirelessly by WDS-TW
Connect detached networks by VigorAP in WDS-Bridge mode-TW
Schedule a VigorAP Reboot-TW
Plan Wireless Coverage with VigorACS 2-TW
Set up AP Load Balance by VigorACS-TW
VigorAP Manual Provisioning by VigorACS-TW
Allow Hotspot User to Log In with Social Media Account-TW
Register a VigorAP to VigorACS-TW
How to deploy a Wi-Fi network-TW
Use the Router as a RADIUS Server-TW
AP-based Access Point Management (APM)-TW
Collect Wireless Debug Log on Vigor AP-TW
Use VigorAP as a Wireless Range Extender-TW
How to upgrade firmware on a AP805 using TFTP method
How to set up a Wireless MESH network using DrayTek Vigor2865Lac and Access Points AP 903 & AP 802
Mesh compatible DrayTek access points with the current routers and APs-Matrix
How to set up 4 SSIDs using VLAN IDs on an access point AP903 using the Vigor 2136ax
How to Configure the Vigor Router Hotspot for Social Media Authentication-DrayOS4
How to configure Wi-Fi access on Vigor2136ax

Others

273

How to add an eSIM to Vigor C510ax – Lte – 5G
How to send email Notifications Via Gmail server with OAuth2.0
MyInk – Application notes
System Maintenance & Monitor
VOIP
Bandwidth Management (QoS)
3rd Party Applications

Video- Switches

1

Video- DrayTek Stacking switch features with P2282x

Podcasts

17

Podcast 15- DrayTek Multi-WAN Load Balancing vs Failover
Podcast 12- DrayTek DrayOS v5: A Comprehensive Guide
Podcast 11- DrayTek VigorACS 3: Features and Benefits
Podcast 9- Configuring Wireless WAN in the Vigor2136ax Router
Podcast 8- How to Enable WAN Aggregation on DrayTek Routers
Podcast 7- Multi-WAN Load Balancing & Fail over
Podcast 6- DrayTek Router features explained
Podcast 5- Applications of Virtual Local Area Networks (VLANs) using DrayTek routers and switches
Podcast 4- How to configure and use High Availability
Podcast 2- Network Security Overview of DrayTek Routers
Podcast 1- Summary of security best practice for my DrayTek router
Podcast 3- Vigor3912s – Security & applications
Podcast 10- Boosting internet speed with DrayTek WAN aggregation
Podcast 16-Securing NAT Port Redirection with Port Knocking on DrayTek Routers
Podcast 14- Draytek VigorACS 3 Hands-on Exercises
Podcast-17 Adelaide DrayTek Training Workshop April 2025
Podcast 13- Two Day Networking Workshop in Auckland 4-5 March 2025 by DrayTek and Snappernet

WAN

10

Track WAN Data Usage by WAN Budget-TW
Add Wireless Internet Connectivity by Wireless WAN
Difference between WAN Connection Detection modes-TW
Introduction to Hardware Acceleration-TW
Optimize the MTU Size-TW
Add IPv6 address on router’s WAN interface-TW
Use the same VLAN ID on different WANs (For Vigor3900/2960)-TW
‘Auto Weight’ and ‘According to Line Speed’ in Load Balance-TW
Import Certificate for Vigor3900’s HTTPS Access-TW
Set up more WANs for Vigor3900

View Categories

Home
Knowledge Docs
General
TW

TW

Setting Up Cloudflare Dynamic DNS on Vigor Router
Allow VPN Access Only from Specific Countries Using GeoIP Object
Enhance WebUI Security with Validation Code Check
Specify a Source IP for NAT Port Forwarding Rules-TW
Upgrade the firmware of VigorIPPBX 3510 by Firmware Upgrade Program-TW
Upgrade the firmware for VoIP module-TW
Use Bonjour on Vigor Router-TW
Inter-VLAN Routing-TW
Upgrade the System Prompt-TW
How to use Temperature Sensor-TW
Collecting VoIP logs from CLI-TW
Limit the IP which can access the management interfaces of the router-TW
IPsec VPN between Mikrotik and Vigor Router-TW
How to Improve DSL Speed-TW
Transfer the Router from the Registered Account to Another MyVigor Account-TW
Designate a Outgoing WAN for SIP Traffic-TW
Difference between firmware files-TW
Track WAN Data Usage by WAN Budget-TW
Forward DNS Queries to a Private DNS Server-TW
Adjust DSL SNR Value from Router’s CLI-TW
Add a Failover VPN Connection-TW
Troubleshoot the Router’s 3G/4G/LTE Connection-TW
Authenticate Remote Dial-In VPN Clients with RADIUS Server-TW
Vigor3900/2960 Hotspot Setup for Guest Profile Login-TW
Authenticate SSL VPN Client by Windows 2008 R2 RADIUS Server -TW
LPR Printing Setup on Windows-TW
Connect Detached Network by VigorAP in Bridge-Point to Point mode-TW
Use VigorAP 810 in Station-Infrastructure mode-TW
Dead Peer Detection (DPD) for IPsec-TW
Add Wireless Internet Connectivity by Wireless WAN
Add more management accounts for Vigor3900/2960 and view their activity-TW
Client Load Balancing by Central AP Management-TW
VPN Pass-Through Setup-TW
Connecting to the Wi-Fi using default password-TW
Use Port Redirection to access a LAN server from the Internet-TW
How to open VigorAP’s management page-TW
Use Open Port to access a LAN server from the Internet-TW
Use Multiple LAN Subnets with Tag-Based VLAN-TW
Introduction to VeriPHY Cable Diagnostic in VigorSwitches-TW
Troubleshoot ADSL Synchronization Issues-TW
Difference between WAN Connection Detection modes-TW
PPPoE Pass-Through Setup-TW
Check the LTE router’s status with an SMS message-TW
How to use QQ Filter of Vigor3900-TW
Use a Unique Self-Signed Certificate on the Router-TW
3G/4G/LTE WAN Setup-TW
Introduction to Hardware Acceleration-TW
How to use Central VPN Management (CVM)-TW
Optimize the MTU Size-TW
PMK Caching and Pre-Authentication-TW
Find out which websites are visited by the LAN clients-TW
Set up Vigor Router as a wireless repeater-TW
IPsec VPN with X.509 Authentication from Windows to Vigor3900/2960 by Smart VPN Client
Troubleshoot VPN Not Connecting-TW
User Management with local user database-TW
GRE Tunnel between Cisco and DrayTek Router-TW
SSL VPN from Windows to Vigor Router-TW
Are Vigor Routers affected by WPS PIN brute force vulnerability (VU#723755)?-TW
Back up a leased line by VPN-TW
Use Vigor130 as a Bridge-TW
PPTP VPN from Windows Smart VPN Client to Vigor Router-TW
How to login my Vigor Router-TW
Reset Vigor Router To Factory Default Settings-TW
Customize the Caller ID Type-TW
IPsec VPN between FortiGate and DrayTek-TW
802.1X Authentication for Windows Client without Server Certificate-TW
802.1X Authentication with Self-Generated Server Certificate-TW
Introduction to VigorAP Mobile Device Management-TW
Difference between DNS Filter Profile and DNS Filter Local Setting-TW
IPsec VPN between Cisco ASA and Vigor3900/2960-TW
How to tell if my ADSL router is Annex A or Annex B?-TW
Redirect HTTPS Requests to an Internal Server-TW
Use the Router’s Internal RADIUS Server for 802.1X Authentication-TW
Use the DHCP server on Vigor3900/2960’s LAN for VPN dial-in clients-TW
Give a Hostname to a LAN server by LAN DNS-TW
L2TP over IPsec from Windows 7 to Vigor Router-TW
Register the router to a SIP server-TW
Activate the Free Trial License for WCF Service-TW
Set time schedule for user’s Internet access-TW
Use Dynamic DNS (DDNS) for Router’s Access-TW
DNS Security-TW
Use Client Key for DynDNS Service-TW
Use Phone Book to make VoIP calls over VPN-TW
Make caller ID display or replace symbol ‘+’ -TW
Use Multiple LAN Subnets with Port-Based VLAN-TW
Introduction to Route Policy-TW
How to limit the number of MAC address to each port interface in a Vigor switch-TW
Add IPv6 address on router’s WAN interface-TW
Forward traffic to another Internet Gateway Router-TW
Which 3G/4G/LTE USB modems are compatible with Vigor Routers?-TW
Authenticate Remote Dial-In VPN Clients with AD/LDAP Server-TW
Adjust NAT Session Timeout Value by CLI-TW
Built-in 4G/LTE WAN Setup-TW
Backup the Database of VigorACS by the script-TW
L2TP over IPsec from Windows 10 to Vigor Router-TW
Send/Receive SMS message from the LTE Routers-TW
How to prevent smart phones from surfing the Internet from Vigor3900/2960-TW
LAN DNS of Vigor3900/2960-TW
Vigor3900/2960 Hotspot Setup for SMS Login-TW
Address Mapping by Route Policy-TW
How to use Session Limit-TW
Use the same VLAN ID on different WANs (For Vigor3900/2960)-TW
WAN Inbound Load Balance in Failover mode by Vigor3900-TW
Connect VPN on Demand with iOS Smart VPN app-TW
Troubleshoot Unstable VPN-TW
How to use Bandwidth Limit-TW
Create multiple Phase 2 SA for IPsec tunnel to connect multiple subnets in one VPN profile-TW
Troubleshoot VPN is up but no traffic-TW
IPsec Tunnel Aggresive Mode between DrayTek Routers-TW
IPsec Tunnel Main Mode between DrayTek Routers (Client with Static IP)-TW
IPsec Tunnel Main Mode between DrayTek Routers (Client with Dynamic IP)-TW
SSL VPN from Android Phones to Vigor Router-TW
L2TP over IPsec VPN between DrayTek Routers-TW
Use multiple SSID on VigorAP-TW
What is Band Steering-TW
Use VigorAP as a Universal Repeater-TW
Which channel does Vigor Router use in 40MHz bandwidth mode?-TW
Use 802.1x authentication for Wi-Fi with an external RADIUS server-TW
Troubleshoot Wireless Connection Problem-TW
Join the Wireless Network by WPS-TW
Dial VPN with mOTP authentication using Windows Smart VPN Client-TW
Dial VPN with mOTP using a token device-TW
‘Auto Weight’ and ‘According to Line Speed’ in Load Balance-TW
WAN Inbound Load Balancing by Vigor3900-TW
How to relay DHCP over LAN? (for Vigor3900/Vigor2960)-TW
Make specific host use VPN tunnel as the default gateway-TW
Set up dual USB WAN and do load balancing on Vigor3900/2960-TW
Authenticate users with a RADIUS server in User-Based Management
Use Vigor3900/2960 to block Youtube for some of LAN clients only-TW
Import Certificate for Vigor3900’s HTTPS Access-TW
Set up more WANs for Vigor3900
Designate the outgoing WAN for LAN Subnet-TW
How to block or pass traffic between Vigor3900/2960’s different LAN networks-TW
Prioritize VoIP Traffic by QoS
Blocking a Website by URL Content Filter and DNS Filter-TW
Block YouTube Service for All the LAN Clients-TW
Hot-Stanby Mode vs. Active-Standby Mode-TW
Redirect VoIP Traffic to a SIP server on LAN-TW
Assign a Fixed IP Address to Remote Dial-in VPN Clients-TW
IPsec VPN between SonicWALL and Vigor Router-TW
Why can’t I access my Vigor Router-TW
Load Balancing and Failover for multi-WAN Vigor Routers-TW
IPsec VPN between Cyberoam and DrayTek-TW
How to use APP QoS-TW
Manage the Router from the Internet-TW
How to have more subnets in one LAN profile (for Vigor3900/2960)-TW
Redirect FTP Traffic to an Internal Server-TW
Collecting router’s Syslog-TW
How to use Route Policy Diagnosis-TW
Capture Packets on Router’s LAN-TW
Lower VPN MSS to access the peer router’s Web UI through VPN-TW
SSL VPN from macOS to Vigor Router-TW
Protect the LAN clients by OpenDNS FamilyShield service (Vigor3900/2960)-TW
Difference between Certificate Verify Level of Smart VPN iOS APP-TW
Dial VPN with mOTP authentication using iOS Smart VPN Client-TW
Send the voice message by email-TW
Set Up Multi-PVC and Bridge to a LAN Port-TW
Set Up Multi-PVC and Open a Virtual WAN Interface-TW
Introduction to VLAN Port Configuration-TW
Troubleshoot for no Internet connection or website not loading completely-TW
Dial VoIP call via IP address with Dial Plan-TW
How to use Call Barring?-TW
Add a Load Balance VPN Connection-TW
How Firewall Filter Rules Work-TW
Specify the MAC Address of WAN Interface-TW
Backup and Restore the Configuration of Vigor Router-TW
Use Packet Monitor to capture packet (For Vigor3900/2960)-TW
Restrict Internet access for time intervals (For Vigor3900/2960)-TW
Capture full Syslog about the USB Modem-TW
Use Queuing Function in Hunt Group-TW
Designate a outgoing WAN for traffic to a certain Website-TW
Why the need for self-signed certificates?-TW
SSL VPN from iOS to Vigor Router-TW
Enable Server Authentication for SSL VPN-TW
How to recover my Vigor Router when it stops responding?-TW
Aggregate WAN’s Bandwidth-TW
Activate a backup WAN during times of heavy load-TW
Differences among Port Redirection, Open Ports and DMZ-TW
Difference between VPN in Route and NAT mode-TW
Change Country Code in Beacon Frames-TW
Single-Arm VPN Configuration-TW
7 Tips to Improve Wi-Fi Performance-TW
Introduction to Interference Monitor-TW
Allow Hotspot User to Get Login PIN code via SMS-TW
Control the Conversation Time for each Trunk by Time Budget-TW
Access a Vigor130 in Bridge Mode-TW
Block Facebook Games Only-TW
Server Load Balancing by Vigor3900-TW
Syslog about Firewall and Content Security Management-TW
Start using Central AP Management-TW
PPTP VPN from Ubuntu to Vigor Router-TW
Why is the Router Responding on Port 80?-TW
Prevent Potential Punycode Phishing Attack-TW
Changing the WCF Service Provider-TW
Block FTP Service by Firewall-TW
Reset Vigor Router To Factory Default Settings-TW
Routing Fundamentals-TW
IPsec VPN between a DrayOS router and a Vigor3900/Vigor2960-TW
Why can I see Vigor Router’s Web Login Page from WAN by HTTPS when “Allow management from the Internet” is disabled?-TW
PPTP VPN between DrayOS Router and Vigor3900/2960-TW
IPsec VPN between Cisco RV Series and DrayTek-TW
IKEv2 VPN between DrayTek Routers-TW
Local Network Setup and Management-TW
GRE Tunnel between Teltonika RUT950 and DrayTek-TW
Enable ALG (Application Layer Gateway) on Vigor Router-TW
Install VigorACS 3 on Linux-TW
Install VigorACS 3 on Windows-TW
Activate/Renew License Key and Add Extension Key for VigorACS-TW
Update VigorAP’s configuration by AP Management (APM)-TW
Upgrade VigorACS SI to VigorACS 2 on Windows-TW
IPsec VPN between Netgear and DrayTek Router -TW
VigorAP Automatic Provisioning with Vigor Router-TW
VigorAP Automatic Provisioning with Vigor Router-TW
PPTP VPN between DrayTek Routers-TW
Connecting Vigor Router and VigorAP wirelessly by WDS-TW
IKEv2 VPN from macOS to Vigor Router-TW
Connect detached networks by VigorAP in WDS-Bridge mode-TW
Introduction to Firewall Content Security Management-TW
Set up BGP Routing between Vigor Routers-TW
Set up the Router as a PPPoE Server-TW
Set Time Quota and Data Quota for LAN clients in User-Based Mode-TW
Schedule a VigorAP Reboot-TW
DHCP Relay over VPN-TW
What is Fast Route and when to use it? (For Vigor3900/2960)-TW
Introduction to Bind IP to MAC-TW
Block most of the websites except for a few only-TW
Plan Wireless Coverage with VigorACS 2-TW
Set up AP Load Balance by VigorACS-TW
Check Clients of Certain Period by VigorACS-TW
Use High Availability in Hot-Standby Mode-TW
VigorAP Manual Provisioning by VigorACS-TW
Use High Availability in Active-Standby Mode (For Vigor3900 and Vigor2960)-TW
Get Notified About Connection Loss by Email-TW
Use DNS Filter and local DNS server at the same time-TW
Troubleshooting Active Directory/LDAP server issues-TW
Difference between LDAP in Simple mode and Regular mode-TW
Allow Hotspot User to Log In with Social Media Account-TW
List All the TR-069 Parameters and Their Value-TW
Authenticate users with an AD/LDAP server-TW
Force LAN Clients to use YouTube in Restricted Mode-TW
Upgrade VigorACS SI to VigorACS 2 on Linux-TW
Customer Tag and Service Tag-TW
Apply Firewall Rule to individual accounts in User-Based mode-TW
Blocking Windows Updates-TW
Use Country Object in Route Policy-TW
What is Fast NAT and when to use it? (For Vigor3900/2960)-TW
Finding Out the URL Keyword to Block-TW
Register a Vigor Router to VigorACS-TW
Register a VigorAP to VigorACS-TW
Disable Validation Code Check for VigorACS Login-TW
Access Vigor Router’s CLI by telnet-TW
Show VRRP MAC in the ARP table-TW
Block Social Networking Websites by Web Content Filter-TW
Allow LAN Client to Choose the Outgoing WAN by LAN IP Alias-TW
Create Firewall rules to restrict LAN to WAN access to specific countries by using country codes-TW
How to deploy a Wi-Fi network-TW
What is RTP proxy and how to use it- VigorBX2000-TW
Use a Public IP on LAN using ‘IP Routed Subnet’ Interface-TW
Use a Public IP on LAN using ‘For Routing Usage’ option-TW
Use the Router as a RADIUS Server-TW
IPsec VPN between Zyxel VMG and Vigor Router-TW
Restrict Remote VPN Network’s Access to Specific IP-TW
Add a LAN IP Address to DMZ-TW
Set up Vigor3900/2960 as an OpenVPN server using local user database-TW
Show VigorAP and VigorSwitch as Sub-Device of a Router-TW
IKEv2 VPN with EAP Authentication from macOS to Vigor Router-TW
What is Isolate Member with IP?-TW
Activate DrayDDNS Service for a Free Hostname-TW
Vigor3900/2960 Auto Configuration Backup-TW
Use different SSIDs for 2.4G and 5G WLAN but allow access to each other-TW
Bridge two Vigor3900/2960’s LAN over GRE Tunnel-TW
IPsec XAuth from iOS to Vigor Router-TW
IPsec XAuth from macOS to Vigor Router-TW
IPsec XAuth from Android to Vigor Router-TW
Operation Modes of VigorAP-TW
Use VigorAP as a RADIUS Server-TW
DHCP Server Options of Vigor Router-TW
Choose the Best VPN Protocol-TW
Schedule a Router Reboot-TW
Block Facebook by APP Enforcement-TW
Wi-Fi Roaming with VigorAP-TW
File Manager of VigorACS-TW
Get the Report of All the CPE’s Management Port-ACS2-TW
Deploying VLANs by SWM and VigorSwitch-TW
Copy configurations from one Switch to the other by Vigor3900’s Switch Management-TW
Use Let’s Encrypt Certificate for your DDNS Domain-TW
L2TP over IPsec VPN from Ubuntu to Vigor Router-TW
IPsec VPN between Google Cloud Platform and DrayTek-TW
Blocking Unauthorized Wireless Clients-TW
Add a Separate Wireless Network for Guests-TW
Troubleshoot Unstable CPE Status-TW
Show Router Name in the Device List of VigorACS-TW
Change the Location of CPE or Network on VigorACS-TW
Introduction to Hotspot Web Portal-TW
Schedule CPE to reboot periodically via VigorACS-TW
Use ACL with Different Actions-TW
OpenVPN Setup on Vigor Router with XCA-TW
Reset CPE Password by VigorACS-TW
Use URL Filter with Exception List-TW
Backup and Restore CPE’s Config via VigorACS-TW
IKEv2 VPN between Microsoft Azure and Vigor Router-TW
Authenticate Hotspot User with External RADIUS Server-TW
Introduction to VigorACS Dashboard-TW
Backup the Database of VigorACS-TW
What Can I Do if I Forgot MySQL password?-TW
Assign a fixed IP address for the remote VPN peer router-TW
Upgrade CPE’s Firmware via VigorACS-TW
Restore SQL File to VigorACS Database-TW
Upgrade VigorACS 2 on Windows-TW
Upgrade VigorACS 2 on Linux-TW
IPsec VPN from Windows to Vigor Router by Smart VPN Client-TW
Create Global Parameter Profile by Sampling-TW
Introduction to IP Conflict Prevention of VigorSwitch-TW
Mapping alias IP addresses to different internal servers-TW
How to set up a mesh network on VigorAP using the Quick Start Wizard-TW
How to set up a mesh network on VigorAP using DrayTek Wireless App-TW
Setting up DSL WAN Bandwidth for QoS-TW
IKEv2 VPN with EAP Authentication from Windows to Vigor Router using Let’s Encrypt-TW
IKEv2 VPN with EAP Authentication from macOS to Vigor Router using Let’s Encrypt-TW
IKEv2 VPN with EAP Authentication from iOS to Vigor Router using Let’s Encrypt-TW
Get Google Map API Key for VigorACS-TW
Difference between Bridge mode and Full Bridge mode on Vigor165-TW
How to fix the connection not private error when using HTTPS Captive Portal for Hotspot-TW
IPsec VPN between Amazon VPC and DrayTek Router-TW
Troubleshoot an unexpected router reboot-TW
The comparison table of User Role on VigorACS-TW
How to assign an IPv6 address to LAN clients?-TW
How to register my Vigor router-TW
Export the Smart VPN profile to other computers-TW
Construction of the NETWORK and CPE MENU on VigorACS-TW
Allow Hotspot User to Get Login PIN code via voucher-TW
IPsec XAuth from Windows to Vigor Router -TW
Use Firewall in User-Based mode with a RADIUS server-TW
IPsec VPN from Windows to Vigor Router using Aggressive mode-TW
Enable Two-factor authentication for VigorACS 2-TW
ONVIF Surveillance Introduction -TW
How to set a schedule on Vigor Router and how it works-TW
SSL VPN between DrayOS Router and Vigor3900/2960- TW
SSL VPN between two DrayTek Routers -DrayOS 4 -TW
Introduction to Denial of Service (DoS) Defense-TW
How to enable firewall during working hours-TW
L2TP over IPsec from Android to Vigor Router-TW
How to block an unknown IP address which keeps dialing VPN to Vigor Router-TW
Configure WAN and VPN alarm on VigorACS-TW
Renew License Key for DrayDDNS Service-TW
How to send all the traffic to VPN tunnel on Vigor3900/2960-TW
How to Isolate WiFi Guests from the LAN?-TW
Restrict VPN access to certain subnets or devices for Remote Dial-in users.-TW
The different LTE status and the meanings on Vigor LTE Router-TW
Differences between Switch types-TW
Backup and Restore VigorAP Configuration Files with VigorConnect-TW
Upgrade VigorAP’s Firmware with VigorConnect-TW
Add VigorAP to VigorConnect-TW
Provisioning Wireless setting to VigorAP by VigorConnect-TW
Find the Serial Number of your Vigor Router-TW
Change VigorACS server port-TW
Use Link Aggregation to increase bandwidth and redundancy between Vigor Switches-TW
Adding LTE Connection to a Broadband Router using VigorLTE 200 or Vigor2620L in LTE Bridge Mode-TW
IKEv2 VPN with EAP Authentication from Windows to Vigor3900 by using the self-signed certificate-TW
How to deploy Mesh network with Multi-Subnets-TW
How to use MAC VLAN on VigorSwitch?-TW
How to fix the SSL VPN connection error after upgrading to iOS 13 and macOS 10.15-TW
Register a VigorSwitch to VigorACS-TW
Why TCP Port 443 is opened on WAN when the Allow management from the Internet option is disabled?-TW
How to use Digital Signature (X.509) to authenticate IPsec VPN between a Vigor3900/2960 and Vigor Router -TW
How to configure individual CPEs by using a pre-configured XML file through VigorACS- TW
How to configure multiple CPEs with an XML file through VigorACS-TW
Pause Internet Access for Kids by Time Schedule on VigorAP903-TW
How to use Digital Signature (X.509) to authenticate a LAN-to-LAN IPsec VPN between Vigor routers-TW
How to add VigorSwitch into the VigorConnect server and set up VLANs-TW
Configure External Authentication server for ACS login credentials-TW
Authenticate management users with RADIUS server-TW
What is VPN Matcher and how to use it-TW
How to establish Host to LAN VPN with VPN matcher-TW
What to do if the NAT/ VPN Performance is lower than expected?-TW
How to use two factor authentication to login Vigor3900/2960-TW
How to Allow Routing Subnet to Access VPN-TW
How to use APP Enforcement?-TW
Allow Hotspot User to Access Internet by Leaving Info-TW
How to switch WAN2 into LAN port-TW
Why UDP services like IPsec, DNS, VoIP disturbed by Vigor Router?-TW
String Object allows administrators to enter more characters to VPN Server Host Name in LAN to LAN dial-out field-TW
What is NAT loopback?-TW
Allow Hotspot User to Login via Receiving PIN code by Mail-TW
How to set up a Vigor Wireless Router as a Mesh Root-TW
How to migrate configurations between different router series-TW
Set up WAN priority on VigorLTE 200n and Vigor2620 LTE series router-TW
IKEv2 EAP between NordVPN and Vigor Router-TW
Upload Firmware to the VigorAP via TFTP-TW
How to use Packet Capture to capture packet (For Vigor3910/2962)-TW
Use MPLS and Internet connection on your Vigor Router at the same time-TW
OpenVPN to Vigor Router by using the self-generated certificate-TW
The difference between Rule-Based and User-Based Policy-TW
Build a Mesh Network by using Wired connection-TW
IPsec VPN between Mikrotik(RouterOS v6.47) and Vigor Router-TW
Using VigorConnect to monitor the Traffic by sFlow-TW
How to use Vigor SMS APP-TW
How to access remote VPN network without login in User-Based mode-TW
How to set up UPnP-TW
How to set up Wi-Fi Mesh Networks using Preferred Uplinks and Auto Reselect-TW
Port Redirection over VPN to a host on the remote network-TW
Apply NAT inside IPsec VPN to match Remote Network’s Firewall Policy-TW
How to avoid IP Spoofing by Vigor Router?-TW
OpenVPN between DrayTek Routers -TW
Create Facebook APP for Hotspot Web Portal-TW
Tips for setting up Mesh network-TW
Prioritize VPN Traffic by QoS-TW
How to get notified on VigorACS when someone has changed the settings of the registered router-TW
PPPoE Overview and Troubleshooting ways-TW
OpenVPN between NordVPN and Vigor Router-TW
How to monitor the temperature by using built-in Temperature Sensor ( For VigorAP1000C/920/918R)-TW
IKEv2 VPN with EAP authentication from iOS to Vigor Router-TW
Use mOTP for Remote Access-TW
Solve the Can’t find VPPP adapter Error of Smart VPN Client-TW
Change the default route by Route Policy-TW
Use Purple WiFi as the External Hotspot Portal Server-TW
How to set up Purple WiFi as an external Hotspot Portal Server (For VigorAP 1060C/960C/AP912C/903)-TW
How to use a Vigor LTE router as a SMS Gateway-TW
Wake up your PC by using WoL(Wake on LAN)-TW
Allow VPN Remote Dial-In connections only during Working Hours-TW
How to set up QoS and Voice-VLAN on Vigor Switch-TW
OpenVPN between Vigor Router and OpenVPN Access Server-TW
Restrict Remote VPN Connection from a Specific Domain name -TW
Limit a VPN account be connected by one remote user only-TW
How to set up ACS 3 as an external Hotspot Portal Server-TW
Use TOTP as Two Factor Authentication (2FA) for Remote Access-TW
Using VigorACS 3 to Enable SD-WAN Network-TW
How to set up VPN tunnels between registered Vigor Routers by SD-WAN on ACS 3-TW
How to configure SIP Alias-TW
Upgrade VigorACS 2 to VigorACS 3 on Windows-TW
Monitoring Application Usage with VigorACS 3-TW
Upgrade VigorACS 2 to VigorACS 3 on Linux-TW
How to set up DHCP Server on VigorSwitch-TW
How to set up DHCP Relay on VigorSwitch-TW
STP introduction and how to set up STP on VigorSwitch-TW
AP-based Access Point Management (APM)-TW
Set up OSPF Routing between Vigor Routers (Vigor2962/3910)-TW
Introduction of DrayTek Mesh network-TW
How to approach zero trust network with Vigor routers-TW
Generate Multiple WireGuard VPN profiles at once by Vigor3910/2962-TW
Use preferred DNS server on Vigor Router-TW
Dial VPN with TOTP Authentication-TW
WireGuard VPN between Vigor Routers-TW
6in4 over PPTP between Vigor routers-TW
WireGuard VPN from macOS to Vigor Router-TW
Change the VLAN ID range reserved by Vigor Router itself-TW
Enhancing DNS Security in Vigor routers to protect users from malware and phishing-TW
How to monitor Vigor165/166 in xDSL bridge mode using VigorACS?-TW
Load Balancing and Failover based on WAN quality-TW
Ways to fix the VPN No PPP Control Protocols Configured Error-TW
Introduction of Smart Action-TW
Overview of Two Factor Authentication (2FA) on Vigor VPN solutions-TW
Set up VPN with Two Factor Authentication(TOTP) on Smart VPN Client-TW
Disable Auto Load Balance for specific services-TW
OpenVPN between pfSense and Vigor Router-TW
Types of VigorSwitch SFP Modules-TW
Fast Transition Roaming 802.11r on VigorAP-TW
Vigor Switch Naming Rules-TW
Loopback Interface for Vigor Router Management-TW
IKEv2 VPN between pfSense and Vigor Router-TW
Blocking DoH (DNS over HTTPS) and QUIC by Vigor Router-TW
IKEv2 VPN with ID between DrayTek Routers-TW
OpenVPN from Android Smart VPN Client to Vigor Router-TW
How to Setup Link Aggregation-TW
Which SNMP OIDs does Vigor Routers support?-TW
Collect Wireless Debug Log on Vigor AP-TW
Upgrade VigorACS 3.3.1 on Windows-TW
Upgrade VigorACS 3.3.1 on Linux-TW
IKEv2 VPN from Android to Vigor Router-TW
Use VigorAP as a Wireless Range Extender-TW
Using WPA2-PPSK on your VigorAP-TW
Displaying Router Netflow data on VigorACS by using VigorConnect as Netflow Collector-TW
What to do when an Undesired route is added after VPN is up-TW
Upgrade VigorACS3 by OTA on Linux-TW
Achieving 2.5G performance on Vigor2962 by using Link Aggregation-TW
How to upload CPE’s serial number and access control by the MAC address-TW
How to create user account and network group by WholesaleWizard-TW
Use BGP Prepend and Weight to change BGP path selection-TW
Fast NAT and Fast Routing on Vigor3912-TW
VPN from LAN-TW
Two Factor Authentication (2FA) with AD/LDAP Server-TW
Server Load Balancing-TW
Monitor your Vigor Router by a Webhook Server-TW
Collect Console Logs through Telnet-TW
Collect Debug Logs of Vigor3912/3910/2962-TW
Register a TelegramBot for Smart Action -TW
Vigor3912S Linux Application Feature Q&A-TW
Running Suricata on your Vigor3912S-TW
Running VigorConnect Server on your Vigor3912S-TW
VLAN Routing on Vigor L2+ Switch
Enhance the Internet browsing privacy by installing AdGuard Home on your Vigor3912S-TW
Using the Starlink Internet with Vigor Router-TW
Forward All DNS Queries to a Private DNS Server-TW
Introduction of IAM -TW
Allow Internet access for certain LAN clients only -TW
Deploy a Wireless Mesh Network with Virtual Controller on VigorAP-TW
Vigor2136 Firewall Configuration Guide for Beginners-TW
IKEv2 VPN with EAP Authentication from Windows to Vigor2136 by using the self-signed certificate-TW
Allow Remote Access from Specific Hostnames-TW
Get Notified About Connection Loss by SMS-TW
Sending notifications with Telegram BOT from Vigor Router-TW
Use 2-Step Authentication for Remote Access -TW
EasyVPN from Linux to Vigor Router by EasyVPN Client Tool for Linux-TW
Enhance Network Security based on IP Reputation-TW
EasyVPN
Set Up a Content Filter for VPN-to-WAN Traffic
Introduction to Stacking
Configure Single Sign On with Azure for ACS login credentials
VRRP on Vigor Router
Sending Configuration Change Notifications Using Smart Action
Saving Router Syslog to Internal Storage
Sending Notifications via Gmail Server with OAuth 2.0
Turn on and off Wi-Fi by Schedule
Secure the NAT Port Redirection connections by Port Knocking
testing for all apps in TW
Protect Router’s Management Interface by Port Knocking -OS 5
Allow Specific Domains to Bypass the Hotspot Web Portal Quota Policy Bandwidth Limit -OS 5
Upload Firmware to the Router via TFTP-OS 5
Ways to Improve Network Security-OS 5
IKEv2 VPN from iOS to Vigor Router-OS 5
Create Google APP for Hotspot Web Portal
Set up Vigor Router as an FTP server -OS 5
Access Multiple Subnets Through the Same VPN Tunnel-OS 5
Adjusting the Priority Between NAT Services and Local Services -OS 5-TW
Set up Vigor Router as an SMB Server-OS 5-TW
Force LAN Clients to use Google Safesearch -OS5 – TW
Force LAN Clients to use Bing and DuckDuckGo SafeSearch -OS 5-TW
How to set up Quality of Service (QoS)-OS 5-TW
Port-Based Access Control by Wired 802.1X -OS 5-TW
Use the Router’s Internal RADIUS Server for Local 802.1X Authentication-OS 5-TW
WireGuard VPN from Windows to Vigor Router-OS 5-TW
Use OpenVPN with TCP port 443 to bypass limited or restricted Internet access-OS 5-TW
Protecting VPN Services on Vigor Routers Using Port Knocking-OS 5-TW
L2TP over IPsec from iOS to Vigor Router-OS 5-TW
Activate the License for Threat Protection-OS 5- TW
Three-Site VPN Communication-OS 5-TW
L2TP over IPsec from Smart VPN to Vigor Router-OS 5
Blocking Social Networking Websites by Threat Protection-OS 5-TW
L2TP over IPsec from macOS to Vigor Router-OS 5-TW
IPsec Tunnel between two DrayTek Routers using the same IP subnet-TW-OS 5
VPN Matcher for DrayOS 5 Vigor Routers-TW-OS 5
Renew License Key for URL/IP Reputation Service-TW-OS 4-OS 5
Threat Protection – Safe Browsing -TW- OS 5
Manage Switches in Stacking – TW – SW

Products

Router Comparison Chart
ADSL/VDSL Modem Routers
Broadband Routers
LTE Routers
Network Management Tools
PoE Switches
Gigabit Switches
Access Points
Accessories
Discontinued Products

Support

FAQs
Knowledgebase
Knowledgebase Videos
Helpdesk
Downloads
Device Interface
3G/4G Modem Compatibility
Warranty Information
Return Information
Terms & Conditions

Information

Blog
Workshop
Webinars
Videos

Social Media

The Hub Unit 10 & 24, 128 Station Rd, Seven Hills, NSW 2147 Australia
(02) 9838 8899
(02) 9838 8818
sales@draytek.com.au
Monday - Friday 9:00 AM - 05:30 PM

© i-LAN Technology Pty Ltd | All rights Reserved | A.B.N: 14 771 710 837 | Where to buy | About i-LAN Technology | About DrayTek